Specifications

assembly

2. Place saw on legs so that holesin bottom of saw line

up with holes in top of legs.

3. Install screws, washers, Iockwashers and nuts as

shown.

SAW._ IBASE t

HEX HEAD SCREW "'--_l

FLAT WASHER __

END _ .

STIFFENER-_i __ , "1

LOCKWASHER ""_' ' '

Ifyou mount the saw on any other bench, make sure that

there is an opening in the top of the bench the same size

as the opening in the bottom of the saw so that the

sawdust can drop through_ Recommended working

height is 33 to 37 inches fromthetopof the saw table to

the floor.

7/16 DIA. HOLES

13 16

I ,

2-3/4

I ,

/" \\ __

\ ®

FRONT OF SAW --'_ 1/2

NOTE: All dimensions in inches

ATTACHING AND ASSEMBLING

TABLE EXTENSIONS

1. Fromamongthe loose parts findthe following hard-

ware: (Quantity indicated isfor two extensions)

*8 Hex Hd. Screw 5/16-18 x 1-1/4

*8 Flat Washer

*8 External Lockwasher, 5/16

"8 Hex Nut, 5t16-18

Items marked with an asterik (*) are shown actual size.

HEX HEAD SCREW

5/16 IN EXTERNAL

LOCKWASH ER

5t16-18

HEX NUT

FLAT WASHER