Specifications
7. Insert 1-1/4 inch long screw through slot in bar that
matches hole in bracket. Install spacer, Iockwasher
and nut. DON'T SCREW NUT ON ALL THE WAY,
just get the nut started on the screw.
8. Install spacer between guide bar and the last front
table hole whichaligns with the fourth hole inthe front
guide bar.
9. Insert 1-3/4 inch long screw through the hole in bar,
spacer and hole intable. Install Iockwasher and nut
but do not tighten.
4TH HOLE
IN BAR
NUT
HEX HEAD SCREW
5/16-8 X 1-3/4 IN.
scREW
5/16-8 X 1-3/4 IN.
LOCKWASHER
iNSTALLiNG REAR FENCE GUIDE BAR
1. From among the loose parts find the following:
1 Bracket
*2 Hex Head Screws 5/16-18 x 1
*2 Hex Head Screws 5/16-18 x 3/4
*4 Flat Washers 5/8 x 1/16
*4 External Lockwashers 5/16
*4 Hex Nuts, 5/16-18
1 Rear Fence Guide Bar
Items marked with an astedk (*) are shown actual size.
5/16-18 x ! IN
HEX HD. SCREW
5/16-18 x 3/4
HEx HEAD FLATWASHER
5/16 IN
EXTERNAL 5/16-18
LOCKWASHER HEX NUT
REAR FENCE GUIDE BAR BRACKET
2. Put the bracket against theright rear edge of the right
extension so the bracket is lined up with the FOURTH
hole near the rear of the extension (see illustration).
3. Insert one of the 3/4 inch long screws through a flat
washer, through the bracket, and through the FOURTH
hole in the extension. Install a Iockwasher and nut on
the screw. Tighten the nut only slightly.
REAR OF
EXTENSION
_ 4TH HOLE
_ \_/_ WASHER
LOCKWASHER 5/16-18 x 3/4
HEX HEAD
SCREW
4. Insert a 1 inch long screw through a flat washer and
through the fourth hole of the rear fence guide bar.
Turn rear bar perpendicular totable and insertscrew
through the middle hole as illustrated. Install
Iockwasher and nut loose to adjust guide bar to the
horizontal position.
5. Insert a 3/4 inchlong screwthrough a flat washer, bar,
and bracket. Install Iockwasher and nut but do not
tighten.
6. Insert 1 inch long screw through a flat washer and
through the second hole of the rear fence guide bar
plus through the matching hole in table. Install
Iockwasher and nut loosely.
LOCKWASH_UT _,:OC \KWA_
11TH HOLE_,.,I-_._ "-7_'''_-_------_-Vj-_T-_ -
HEX HEAD SCREW WASHER i HEX HEAD SCREW
5/16-18 X 3/4 HEX HEAD SCREW 5/16-18 X 1
5/16-18 X 1 IN.
15