Specifications

ALIGNING RiP FENCE
The Fence should slide easily alongthe Bars and always
remain in alignment (parallel to sawblade and Miter
Gauge Grooves),
The alignment ismaintained by a springunderneath the
Fence which bears against the Front Guide Bar.
To move the Fence, loosen the Lock Handle and grasp
the Fence with one hand at the front.
For very close adjustments, grasp the Guide Bar with
both hands and move the Fence with your thumbs.
\
SELF ALIGNING SPRING ADJUSTMENT
Place Fence on saw but DO NOT LOCK IT.
Move the REAR END ofthe Fence slightlytothe rightor
left.When yourelease it,the Fence should "spring"back
to its originalposition.
ifitdoes not,the springpressure must be INCREASED,
1. Loosen the screws.
2. Move spring slightly toward frontof Fence. Tighten
screws.
backs and jams. To avoid injury, follow these
instructions until the fence properly self aligns.
17