Specifications

basic saw operation - using the miter gauge
WORK FEED DEVICES
Before cutting any wood on your saw, study all of the
"Basic Saw Operation."
As you learn new table saw woodworking techniques,
you'llsee that many types of cutsneed different support
and feedingdevices, known as jigsor fixtures. They can
help you make cuts more accurately. By helping to
steadythe workpiece andkeep you away fromthe blade,
they can help you safely use your saw for certain cuts.
Many people custom build their own jigs and fixtures.
Jigsand fixturesareoflen unique,designed fora particu-
lar CUt.
You can use yourtable saw to easilymake many jigsand
fixtures. To get you started, we've included instructions
for some simple ones. After you have made a few
practice cuts, make up these jigs before sta_ling any
projects. Make the push stickfirst.
PUSH STICK AND PUSH BLOCK
Make the Push Stick using a piece of I x 2.
Make the Push Block using a piece oi3/8 in. and 3!4 in.
plywood.
The small piece of wood 3/8 x 3/8x 1-1/2 inches should
be GLUED to the plywood. DO NOT USE NAILS. This
is to prevent dulling the sawblade in the event you
mistakenly cut into the Push Block.
Pos'dionthe handle in the center of the plywood and
fasten together with glue and woodscrews.
AUXILIARY FENCE/WORKSUPPORT
Make oneusing apiece of 3/8 inchand 3/4 inch plywood.
Fasten together with glue and flat head woodscrews.
Tighten the screws so the flat head is even with the
bottom of the wood.
SLIGHTLY LESS THAN
THICKNESS OF WORKPIECE
UP TO 3/8"
45 ° NOTCH
NOTE. Ai! dimenstons in inches
PUSH STICK
THESE EDGES MUST
BE PARALLEL
4-3/4
\,
3/4 PLYWOOD
3t8_ 2-1/
5-1/8 3/8
NOTE Atl Chmens=ons in inches
PUSH BLOCK
3/8 PLYWOOD
3/4 PLYWOOD
THIS FACE AEID
EDGE MUST BE
PARALLEL
3/8 PLYWOOD
NOTE All dimension in inches
5-1/2
1-1/4
WOODSCREWS
AUXlUARY FENCE/WORK SUPPORT
= =
AUXILIARY PANEL WORK SUPPORT
Make using a piece of 3/4" x 3/8" plywood. Fasten
together with glue and wood screws. Use this Auxiliary
Panel Work Supped only when cutting large panels that 3-5/8
require the Rip Fence to be positionedpast the exposed
side of the extension.
MUST BE
PARALLEL
NOTE: All dimension in inches
AUXILIARY PANEL/WORK S_
3O