Specifications
basic saw operation
DADOING
Instructionsfor operating the Dado Head are contained
in booklet furnished with the Dado Head.
The arbor on the saw, is only long enough so that the
widest cut that can be made is 13/16 inch wide.
It is not necessary So install the outside loose collar
before screwing on the artx>rnut. Make sure the arbor
nut istight.
ALWAYS USE DADO INSERT LISTED UNDER "REC-
OMMENDED ACCESSORIES."
When using the Dado Head it will be necessary to
remove the Blade Guard and Spreader. USE CAU-
TION. USE MITER GAUGE,FENCE, FEATHER-
BOARDS OR PUSH STICKS, etc. AS REQUIRED.
WARNING: For your own safety, always replace ]
the blade, guard and spreader when you are
I
finished dadoing.
LOOSE COL!.
Ill
ARBOR
I
iU SAW ARBOR
REMOVE SAWBLADE AND
INSTALL DADO HEAD
BACK OF SAW
MOLDING CUTTING
Instructions for operating the Molding Head are con-
tained in a booklet furnished with the Molding Head.
Always use the Molding insert listed under "RECOM-
MENDED ACCESSORIES'.
When using the Molding Head, itwill be necessary to
remove the Blade Guard and Spreader. USE CAU-
TION. USE MITER GAUGE. FENCE, FEATHER-
BOARDS OR PUSH STICKS, ETC, AS REQUIRED.
j WARNING: For your own safety, always replace I
the blade guard and spreader when you are fin-
I
I_ted molding.
USING FEATHERBOARDS FOR NON-
THRU SAWING
Featherboards are not employed during nonthru-saw-
ing operations when using the Miter Gauge.
Use Featherbaords for all other non thru-sawlng
operations (when sawbladeguard must be removed).
Featherboards are used to keep the work incontact with
the fence and table as shown and to stop kickbacks.
Add 7-1/2 inch highflat facing board tothe fence, the full
length of the fence. Mount Featherboard tofence and
table as shown, sothat leading edges of Featherbaords
will support workpiece until cut is complete, and the
"C"CLAMPS
FEATHERBOARD
"C CLAMPS "C'_CLAMPS
WORK
Stick, as in ripping.
Before starting the operation (switch "OFF" and cutter
belowtable surface):
1. Install Featherboards se they exert pressure on the
workpiece; be positive they are secure and
2. Make sure by trial that the Feathe_boards will stop a
kickback ifone should occur.
Replace the sawblade guard as soon as the non thnu-
sawing operation is complete.
38