Specifications

Separate all parts from packing materials ana check
each one with the illustration and the list of Loose Parts
to make certain all items are accounted for. before dis-
carding any packing material.
' WARNING: If any parts are missing, do not J
attempt to assemble the table saw or plug in
f
the power cord or turn the switch on until the
missing parts are obtained and are instaUed
correctly.
Remove the protective oil that is appliedto the table top
and edges of the table. Use any ordinary household
type grease and spot remover.
j WARNING: To avoid fire or health hazard, never J
i
use gasoline, naptha or simiJar highly volatile
I
so,vents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth,
WARNING: For your own safety, never connect
plug to power source outlet until all assembly
steps are complete, and you have read and
understood the safety and operational instruc-
tions.
LIST OF LOOSE PARTS
Identify Parts
The following parts are included'.
NOTE: Before beginning assembly, check that all parts
are included,If you are missing any part, do not assem-
ble the saw. Contact your Sears Service Center to get
the missing part, Sometimes small parts can get lost _n
packaging material. Do not throw away any packaging
until saw is put together. Check _ackaging for missing
parts before contacting Sears.,A corn plete parts list
(Repair Parts) Isat the end of the manual. Use the list to
identifythe number of the missing part.
Item Part Name
A Miter Gauge Assembly .................................... 1
B Saw Guard Assembly ........................................
C Fence Assembly ................................................ 1
D Front Fence Guide Bar ...................................... 1
E Rear Fence Guide Bar ...................................... 1
F Bag of Loose Parts ............................................. *
G Owners Manual .................................................. 1
H Leg ..................................................................... 4
I End Stiffener ...................................................... 2
J Side Stiffener ..................................................... 2
K Table Extension 12 x 27 .................................... 2
L Motor .................................................................. 1
M Fence Tape ........................................................ 2
N Lower End Stiffener ........................................... 2
O Lower Side Stiffener .......................................... 2
P MicroAdjust Rack .............................................. 2
Q Motor Base ........................................................ 1
• Number varies; bags can contain other smaller bags.
Check both table saw and rip fence packages for bag
packs,
F
NOTE: To make assembly easier, keep contents of
each bag together and separate from contents of other
bags.
Q
M
10
I t