Manual

Assembly (continued)
9. Mount (1) retaining ring onto one end of axle. Using
pliers,snap retainingring intogrooveon axle.
10. Slidewheel onto open end of axle.
11. Slide open end of axle thru cradle left and left leg,
makingsure the leg slot lines up withthe cradle hole.
Slidealltheway throughthe cradle rightand rightleg.
Light taps with a hammer may be required to fully
insertaxle.
Cradle
Righ_
Cradle
Left
II
Open
End
Left Leg ..j_i
Axle
w/Wheel
12. Slide wheel onto open end of the axle and mount
secondretainingring.
Retaining
Ung
• Wheel
13. Insert the caster stem intothe socket of the caster
footas shown. (Frontcastersonly)
14. Push on the caster untilthe ball on the caster stem is
insertedallthe way intothe socket.Youwillbe ableto
hear the ball snap into the socket and the caster will
swiveleasilywhen positioningiscorrect.
15. Flipdrumuprightsoas to reston twocasters and two
10" wheels.
Socket
4