Owner`s manual

BladeDiameter 12in.
Blade Arbor 5/8 in.
No Load Speed 4000 RPM
Rating 120 Volts,60 Hz-AC Only
Input 15 Amperes
Nat Weight 41 Ibs.
CuttingCapacitywith Miterat 0°/Bevel 0°:
max widthx resultingheight 7-7/8 in. x 2-1/2 in.
MaximumCuttingCapacity with Miterat 45°/Bevel 0°:
max width x resultingheight 5-1/2 in. x 2-1/2 in.
MaximumCuttingCapacity with Miterat 0°/Bevel 450:
max widthx resultingheight 7-7/8 in. x 1-3/4 in.
YourCompoundMiterSaw hasbeen shipped
completelyassembledexceptforthe blade, miter lock
handle,and dust guide.
A WARNING: Ifany parts are missing,do not
operate this tool untilthe missing partsare
replaced. Failuretodo so could resultin possible
seriouspersonalinjury.
• Remove all loose partsfromthe carton. Separate
andcheckwiththe listof looseparts. See Figure2.
• Remove the packingmaterialsfromaround your
seW.
• Carefully liftsaw fromthe cartonand place it on a
level work surface.This saw is heavy. To avoid
back injury,get helpwhen needed.
• Do notdiscardthe packingmaterials untilyou
have carefullyinspectedthe sew, identifiedall
looseparts,and satisfactorilyoperated yournew
SeW.
• Your sew has been shipped withthe sew arm
lockedin the downposition.To release sew arm,
pushdownon top of sew arm and pullout the lock
pin. See Figure 4.
• Hand pressureshouldremainon thesaw arm to
preventsudden dse upon releaseof the lockpin.
• Examine all partsto make sure no breakage or
damage has occurredduringshipping.
Ifany partsare damagedor missing,do notattemptto
plug inthe power cordand turn the switchon untilthe
damaged or missingpartsare obtainedand are
installedcorrectly.