Operator's Manual 20 Gallon Wet/Dry Vacuum Model No. 125.12009 • Safety • Assembly CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating instructions. • Operation • Maintenance • Parts • Espa_ol Sears Brands Management Corporation, WWW. crafts man. COrn Hoffman Estates, = p_gina 16 IL 60179 U.S.
Warranty CRAFTSMAN ONE YEAR FULL WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against defects in material or workmanship. A defective product will be replaced free of charge. For warranty coverage details to obtain free replacement, visit the web page: www. craftsman.com/warranty This warranty does not cover bags, filters, hose or attachments, which are expendable parts that can wear out from normal use within the warranty period.
starting, unplug powercordbefore changing orcleaning filter. • DonotleaveWet/Dry Vacunattended whenplugged in.Unplug fromoutlet whennotinuseandbefore servicing. •TurnoffWet/Dry Vacbefore unplugging. • Donotputanyobjectintoventilation openings. Donotvacuum withany ventilation openings blocked; keepfree ofdust,lint,hairoranything thatmay reduce airflow. • Keephair,looseclothing, fingers, and allpartsofbodyawayfromopenings andmoving parts. • Toreduce theriskoffalls,useextra carewhencleaning onstairs.
Introduction This Wet/Dry Vac is intended for vacuuming wet and dry materials may be used as a blower. Read this operator's manual to familiarize yourself with the product features and to understand the specific usage of your new Wet/Dry Vac. and Table of Contents Section Page Warranty ................................................. 2 Section Maintenance Page ......................................... 10 important Safety instructions ........... 2 Emptying the Collection Polarized Plug .........
Assembly Remove entire contents of carton and check for parts inside the collection tank. Check each item against the Carton Contents List. If any parts are missing or damaged please call 1-800-469-4663 for replacement. Carton Content Key A B C D E F G H I J K L M List Description .......................... Qty. Vac Assembly .......................... 1 Hose ........................................ 1 Extension Wands .................... 2 Utility Nozzle ........................... 1 Crevice Tool .........
Assembly (continued) A Phillps head screw driver is required. ,_, WARNING: Do not plug in power cord to power outlet, make sure plug is disconnected before assembling the wet/dry vac. UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Undo the latches. (Fig. 2) 3. Lift the power head off the collection tank and place on a fiat clean surface. (Fig. 3) 4.
Operation Vacuuming Dry Materials ,_ WARNING: Be sure to read, understand and apply all the information in the important Safety instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oil-base paints, gasoline, alcohol or aerosol sprays.
Operation (continued) Vacuuming Liquids ,_ WARNING: Be sure to read, understand and apply all the information in the important Safety instructions section at the beginning of this operator's manual. Do not vacuum in areas with flammable gases, vapors, or explosive dusts in the air. Flammable gases or vapors include but are not limited to: lighter fluid, solvent type cleaners, oil=base paints, gasoline, alcohol or aerosol sprays.
Operation (continued) Blowing Feature WARNING: Always wear safety goggles complying with ANSi Z87.1 (or in Canada, CSA Z94.3) before using blower. WARNING: Keep bystanders WARNING: Wear a dust mask if blowing creates dust that might be inhaled. clear from blowing debris. This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructionslisted. 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2.
Maintenance Emptying the Collection Tank 7. Place power head on collection tank and secure latches. 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Disconnect the hose from the vacuum. (Fig. 2) 3. Undo the latches and remove the power head from the collection tank. (Fig. 3) Place power head on a soft, clean surface upside down. 4. Clear all dirt or debris from the collection tank and hose into a proper waste container. (Fig. 4) 5. Clean or replace the filters. 6.
Maintenance (continued) A iMPORTANT! Clean or change the cartridge filter regularlyfor best performance. ALWAYS USE CARTRIDGE FILTERFOR DRY VACUUMING. If the machine is used without the cartridge filter, the motor will burn out and the warranty will be voided. Always keep spare filters on-hand. Installing A Replacement Cartridge Craftsman Filter with Rubber Top WARNING: Always disconnect the plug from the power outlet before removing the power head from the collection tank.
Maintenance Installing & Cleaning (continued) Foam Sleeve installing Foam Sleeve Filter 1. Verify that the power cord is disconnected from the outlet. (Fig. 1) 2. Remove power head from collection tank. if cartridge filter is installed, remove as shown on page 10 "Removing and Cleaning Cartridge Filter". 3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is covered. (Fig. 2 & 3) 4. Place power head on collection tank and secure latches.
Troubleshooting i_ UNPLUG TROUBLESHOOTING. ARNING:BEFORE TO REDUCE THE RISK OF ELECTRIC SHOCK Problem Vacuum Possible will not operate. Causes 2) 2) Unplug and check the power cord. If damaged, have it repaired by a professional. Faulty power cord. 4) Switch out from motor cover. Reduced efficiency and motor/speed vibration, Action 1 ) Check power supply - cord, breakers, fuses. 3) Collection Dust comes Corrective 1 ) No power supply. tank is full. in the wrong position.
Repair Parts 125.12009 20 Gallon Wet/Dry Vac Always order by part number, not by key number. Always mention the model number when ordering parts. The model number is found on the serial plate located on the vacuum. To order parts, call 1-800-469-4663. _l_ WARNING: Servicing of double-insulated wet/dry vacuum. With double-insulated wet/dry vacuum, two systems of insulationare provided instead of grounding.
Repair Parts {Continued) 20 Gallon Wet/Dry Vac -7 i i 11 6 12 8 ._" ........ -] L._.......
Manual Del Operador Aspiradora Para Materiales H(JmedoslSecos De 20 Gaiones N_m. de modelo 125.12009 • Seguridad PRECAUCION: Antes de usar este producto, lea este manual = Ensamble • Operaci6n • Mantenimiento y siga todas las reglas de seguridad e instrucciones de operaci6n. = Piezas = English- Page 1 Sears Brands www.ctaftsman.com Management Corporation, Hoffman Estates, IL 60179 EE.UU.
Garantia GARANTJA TOTAL DE UN ANO DE CRAFTSMAN DURANTE UN AI_IO a partir de la fecha de cornpra, este producto est_ garantizado contra defectos de material o rnano de obra. Un producto defectuoso ser_ reernpJazado sir ning_n costo. Para detalles sobre la cobertura de la garantia para obtener un reernplazo gratuito, visite la p_gina web: www.craftsman.corn/warranty.
• No deje la aspiradora de material hOmedo/seco desatendida cuando la conecte. Desconectela del tomacorriente cuando no esta en uso y antes de realizar el servicio. • Apague la aspiradora de material hOmedo/seco antes de desconectarla. • No coloque ningOn objeto en las aberturas de ventilaci6n. No aspire con ninguna de las aberturas de ventilaci6n bloqueadas; mantengala libre de polvo, pelusa, cabello o cualquier objeto que pudiera reducir el fiujo de aire.
Introducci6n Esta aspiradora de material humedo/seco est& diseSada para aspirar materiales humedos y secos, ademAs puede usarse como un soplador. Lea este manual del operador para familiarizarse con las caracter{sticas del producto y para entender el uso especffico de su nueva aspiradora de material humedo/seco. indice Secci6n P&gina Secci6n Garantia .................................................... 1 7 Instrucciones Mantenimiento de seguridad importantes .........................................
Ensamble Retire todo el contenido de la caja y vedfique si hay partes dentro del tanque de recolecciSn. Verifique cada parte contra la lista de contenido de la caja. Si hay alguna parte faltante o da5ada, Ilame al 1-800-469-4663 para recibir un reemplazo. Lista Del Contenido De La Caja C C ) C ............................................ ) Clave Descripci6n ............................ Cantidad A Ensamble de la aspiradora ................. 1 B Manguera .............................................
Ensamble (continuacion) Se requiere de un destornillador cabeza Phillips. ,_ de ADVERTENCIA: No enchufe el cable de corriente al tomacorriente; asegurese de que el enchufe est6 desconectado antes de ensamblar aspiradora de material 6. Coloque el colgador de almacenamiento de la manguera como se muestra en la ilustraciSn.
Operacion Aspiracion ,_ de Materiales ADVERTENCIA: Asegurese Secos de leer, entender y aplicar toda la informaciSn de la secciSn de instrucciones de seguddad importantes que est& al inicio de este manual de operaciones. No aspire en &teas con gases infiamables, vapores o polvos explosivos en el aire. Los gases o vapores inflamables incluyen, entre otros: liquidos encendedores, limpiadores de tipo solvente, pinturas con base de aceite, gasolina, alcohol o aerosoles.
Operacion Aspiracion ,_ (continuaci6n) de Liquidos ADVERTENCIA: Asegurese de leer, entender y aplicar toda la informaci6n de la secci6n de instrucciones de seguridad importantes que estA al inicio de este manual de operaciones. No aspire en Areas con gases inflamables, vapores o polvos explosivos en el aire. Los gases o vapores inflamables incluyen, entre otros: Ifquidos encendedores, limpiadores de tipo solvente, pinturas con base de aceite, gasolina, alcohol o aerosoles.
Operacion (continuacion) Funcion de Soplado ,_ADVERTENCIA: Siempre use lentes de seguridad que cumplan con la norton ANSI Z87.1 (o en CanadA, CSA Z94.3) antes de usar el soplador. ,_ADVERTENCIA: Mantenga _,ADVERTENCIA: Use una mascarilla pudiera inhalarse. a los transeuntes lejos de los desechos anti polvo si el soplado Esta aspiradora de material hQmedo/seco tiene capacidades de soplado. Para usar la funciSn de soplador siga Ins instrucciones que se enumeran a continuaciSn. 1.
Mantenimiento Corno Vaciar el Tanque de Recoleccion 7. Coloque la cabeza motriz sobre el tanque de recolecci6n y asegure los pasadores. 1. Verifique que el cable de corriente est6 desconectado del tomacorriente. (Fig. 1) 2. Desconecte la manguera de la aspiradora. (Fig. 2) 3. Abra los pasadores y retire la cabeza motriz del tanque de recolecci6n. (Fig. 3) Coloque la cabeza motriz en una supefficie suave y limpia en posici6n invertida. 4.
Mantenimiento (continuacion) IMPORTANTE: Pare un mejor desempefio, limpie o cambie el fiitro de cartucho con regularidad. SIEMPRE USE EL FILTRO DE CARTUCHO PARA ASPIRAR MATERIAL SECO. Si la ADVERTENCIA: Siempre desconecte ei enchufe del tomacorriente antes de quitar ia cabeza motriz del tanque de recolecciSn. mAquina se usa sin el _tro de cartucho, el motor se quemar& y la garantia se anular& Siempre tenga _tros de repuesto a ia mano.
Mantenimiento (continuaci6n) Instalaci6n del Filtro de Manga de Espuma y Limpieza Instalaci6n del filtro de manga de espuma 1. Verifique que el cable de corriente est6 desconectado del tomacorriente. (Fig. 1) 2. Retire la cabeza motriz del tanque de recolecci6n. Si hay un filtro de cartucho instalado, retirelo como se muestra en la pAgina 25 "Retirar y limpiar el filtro de cartucho". 3.
Resolucion [_, de Problemas DESCONECTE LA ASPIRADORA DE RESOLVER UN PROBLEMA. ADVERTENCIA: PARA REDUCIRANTES EL RIESGO DE DESCARGAS ELECTRICAS, Problema La aspiradora no funciona. i Causas posibles 1) No hay suministro de energia. Acci6n correctiva 1) Revise el suministro de energia cabte, disyuntores, fusibtes. 2) Cable de corriente defectuoso, 2) Desconecte y revise el cable de corriente. Siesta dafiado, envieto a reparar con un profesional. 3) El tanque de recolecci6n est& Ileno.
Partes de Repuesto 125.12009 Aspiradora De Material HumedolSeco De 20 Galones Siempre ordene pot n_mero de parte y no por nQmero de clave. Siempre mencione el nQmero del modelo cuando ordene partes. El n_mero de modelo se encuentra en la plata de serie que se encuentra en la aspiradora, Para ordenar partes, Ilame al 1-800-469=4663. _iL ADVERTENCIA: Como dar servicio a una aspiradora de material h_medo/seco de doble aislamiento.
Partes de Repuesto Aspiradora (Continuaci6n) De Materiales HumedoslSecos De 20 Galones .J 11 5 12 6 7 8 14 9 r ..... 7--I L..__ .J 17 F ........ 7 18 20 L..... L..