Operator`s manual

UNPACKING YOUR MITER SAW
IA WARNING I
To avoid injury from unexpected starting or
electrical shock, do not plug the power cord into a
source of power during unpacking and assembly.
This cord must remain unplugged whenever you are
working on the saw.
1. Remove the miter saw from the carton.
IMPORTANT: Do not lift miter saw by the Trigger
Switch handle. It may cause misalignment. Lift
machine by the built-in carry handle.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check
each one with the illustration to make certain all items
are accounted for, before discarding any packing
material.
WARNINGI
If any part is missing or damaged, do not attempt
to assemble the miter saw, or plug in the power
cord until the missing or damaged part is correctly
replaced. To avoid electric shock, use only identical
replacement parts when servicing double insulated
tools. Call 1-800-4-MY-HOME ® for replacement parts.
Miter Saw
Hold-Down Clamp
Miter Handle
Hold-Down Clamp Lock Knobs
__ Blade Wrench
Screws
Extension Table
Dust Bag Elbow
Dust Bag
Long Bottom Support
Stand Legs
Foot Pad
Short Bottom Support Short Upper Support Hardware Bag
Long Upper Support
Batteries