Operator`s manual

BASE- Supportsdrillpress.Foradditionalstability,
holesareprovidedinbaseto boltdrillpressto
workbench.
HEADLOCKINGSCREWS- Lockstheheadtothe
column.ALWAYSlockheadinplacewhileoperatingthe
drillpress.
BACKUPMATERIAL- A pieceofscrapwoodplaced
betweentheworkpieceandtable.Thebackupboard
preventswoodintheworkpiecefromsplinteringwhen
thedrillpassesthroughthebacksideoftheworkpiece.It
alsopreventsdrillingintothetabletop.
BELTTENSION- Refertothe"Assembly"Section,
"InstallingandTensioningBelt".
BELTTENSIONLOCKKNOB- Locksthemotor
bracketsupportmaintainingcorrectbeltdistanceand
tension.
BEVELSCALE- Showsdegreeoftableangleforbevel
operations.Scaleislocatedbehindthetable.
CHUCK- Holdsadrillbitorotherrecommended
accessoryto performdesiredoperations.
CHUCKKEY- A self-ejectingchuckkeyisprovided
anddesignedto popoutofthechuckwhenyouletgoof
it.Thisactionisdesignedto helppreventthrowingofthe
chuckkeyfromthechuckwhenthepoweristurnedON.
Donotuseanyotherkeyasasubstitute,ordera new
oneifdamagedorlost.
COLUMN- Connectsthehead,table,andbaseona
onepiecetubeforeasyalignmentandmovement.
DEPTHSCALE-Indicatesdepthofholebeingdrilled.
Scaleislocatedonleftsideofdrillhead.
DEPTHSCALESTOPNUTS- Canbeadjustedtostop
thequillforcertaindepthdrillingoperations.
DRILLBIT- Thecuttingtoolusedinthedrillpressto
makeholesinaworkpiece.
DRILLINGSPEED- Changedbyplacingthebeltinany
of thesteps(grooves)inthepulleys.SeetheSpindle
SpeedChartinsidebeltguard.
ON/OFFSWITCH- Incorporatesasafetyswitch
keywhichcanberemovedto preventaccessfrom
unauthorizedusers.Insertthekeyintotheswitchtoturn
thedrillpresson.
PULLEYCOVERASSEMBLY- Coversthepulleysand
beltduringoperationofthedrillpress.
RACK- Combineswithgearmechanismtoprovide
easyelevationofthetablebythetablecrankhandle.
RACKRING- Holdstherackto thecolumn.Rack
remainsmovableinthecollartopermittablesupport
movements.Alwayscheckthatringistightbefore
startinganyoperation,
REVOLUTIONSPERMINUTE(R.P.M)- Thenumber
ofturnscompletedbyaspinningobjectinoneminute.
SPINDLESPEED- TheR.P.M.ofthespindle.
SPRINGCAP- Adjuststhequillreturnspringtension.
TABLE- Providesaworkingsurfacetosupportthe
workpiece.
TABLEBEVELLOCKBOLT- Locksthetableinany
positionfrom0°- 45°.
TABLECRANKHANDLE- Elevatesandlowerstable.
Supportlockhandlemustbereleasedbeforeoperating
crank.
TABLESUPPORTLOCKHANDLE- Tighteninglocks
thetablesupporttothecolumn.Alwayshaveit lockedin
placewhileoperatingthedrillpress.
TABLEBRACKET- Ridesonthecolumntosupport
thetable.
WORKPIECE- Materialbeingdrilled.
FEEDHANDLE- Movesthechuckupordown.One
ortwoof thehandlesmayberemovedifnecessary
whenevertheworkpieceisofsuchunusualshapethatit
interfereswiththehandles.
FENCE- Attachestothetableto aligntheworkpiece
orforfastrepetitivedrilling.Removefencewhenit
interfereswithotherdrillpressaccessories.
12