Operator`s manual

RECOMMENDED ACCESSORIES
[,_WARNING J
Use only accessories recommend for this drill press.
Follow instructions that accompany accessories, Use of
improper accessories may cause hazards,
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the follow accessories:
• Drill bits
• Hold-Down Clamps
• Drill press Vises
[ WAR"I"GI
Use only acessories designed for this drill press to
avoid injury from thrown broken parts or workpieces.
Sears may recommend other accessories not listed in
this manual. See your nearest Sears store or Power and
Hand Tool Catalog for other accessories.
Do not use any accessory unless you have completely
read the instruction or operator's manual for that
accessory.
SUPPLIED NOT SUPPLIED
Slotted screwdriver
3 mm hex key
,, 12 mm wrench
4 mm hex key _ (O_
Adjustable wrenches
Combination square
¢ ¢
Block of wood
UNPACKING AND CHECKING CONTENTS
,&WARNING I
Ifany partismissingordamaged, do notplugthedrill
pressinuntilthemissingordamaged partisreplaced,
and assembly iscomplete.ContacttheCustomer Help
Lineat1-800-843-16828:30AM-5:00 PM EST
Monday-Fridayformissingparts.
Carefully unpack the drill press and all its parts, and
compare against the list below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
,_WARNING
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the drill press.
Apply a coat of paste wax to the table, column and
machined surfaces of base to prevent rust. Wipe
all parts thoroughly with a clean dry cloth.
ITEM DESCRIPTION QUANTITY
A. Head assembly 1
B. Base 1
C. Table 1
D. Column assembly 1
E. Rack ring 1
F. Rack 1
G. Feed handles 3
H. Worm gear 1
I. Table crank handle 1
J. Table lock handle 1
K. Hex bolts 3
L. Fence assembly 1
M. Fence locking knobs 2
N. Wing nuts 2
O. Washers 4
P. 3 mm & 4 mm hex keys 2
Q. Chuck key 1
R. Chuck 1
S. AAA batteries 2
T. Operator's manual 1
Hammer or rubber mallet
9