Operator`s manual

BASE - Supports drill press. For additional stability, holes
are provided in the base to bolt drill press to the floor. (See
"specific Safety Instructions for Drill Presses".)
BACKUP MATERIAL - A piece of scrap wood placed
between the workpiece and table. The backup board
prevents wood in the workpiece from splintering when the
drill passes through the backside of the workpiece. It also
prevents drilling into the table top.
BELT GUARD ASSEMBLY - Covers the pulleys and belt
during operation of the drill press.
BELT TENSION - Refer to the "Assembly" Section,
"Installing and Tensioning Belt."
BELT TENSION HANDLE - Turn the handle clockwise to
apply tension to belt, turn the handle counterclockwise to
release belt tension.
BELT TENSION LOCK KNOBS - Tightening the knobs
locks the motor bracket support and the belt tension handle,
maintaining correct belt distance and tension.
BEVEL SCALE - Shows degree of table tilt for bevel
operations. The scale is mounted on the side of the arm.
CHUCK - Holds a drill bit or other recommended accessory
to perform desired operations.
CHUCK KEY - A self-ejecting chuck key which will pop out
of the chuck when you let go of it. This action is designed to
help prevent throwing of the chuck key from the chuck when
the power is turned "ON". Do not use any other key as a
substitute; order a new one if damaged or lost.
COLUMN - Connects the head, table, and base on a one
piece tube for easy alignment and movement.
COLUMN COLLAR - Holds the rack to the column. Rack
remains movable in the collar to permit table support
movements.
COLUMN SUPPORT - Supports the column, guides the
rack and provides mounting holes for the column to the
base.
DEPTH SCALE STOP NUTS - Lock the spindle to a
selected depth.
DEPTH SCALE - Indicates depth of hole being drilled.
DRILL BIT - The cutting tool used in the drill press to make
holes in a workpiece.
DRILL ON/OFF SWITCH - Has locking feature. This feature
is intended to help prevent unauthorized and possible
hazardous use by children and others. Insert the key into the
switch to turn the drill press on.
DRILLING SPEED - Changed by placing the belt in any of
the steps (grooves) in the pulleys. See the Spindle Speed
Chart inside belt guard.
FEED HANDLE - Moves the chuck up or down. If
necessary, one or two of the handles may be removed
whenever the workpiece is of such unusual shape that it
interferes with the handles.
FENCE - Attaches to the table to align the workpiece or for
fast repetitive drilling. Removable. Remove fence when it
interferes with other drill press accessories.
HEAD LOCKS - Locks the head to the column. ALWAYS
lock the head in place while operation the drill press.
RACK - Combines with gear mechanism to provide easy
elevation of the table by the hand operated table crank.
REVOLUTIONS PER MINUTE (R.P.M.) - The number of
turns completed by a spinning object in one minute.
SPINDLE SPEED - The R.P.M. of the spindle.
SPRING CAP - Adjusts the quill return spring tension.
TABLE SUPPORT LOCK - Tightening locks the table
support to the column. Always have it locked in place while
operating the drill press.
TABLE - Provides a working surface to support the
workpiece.
TABLE BEVEL LOCK - Locks the table in any position from
0 to 45.
TABLE CRANK - Elevates and lowers the table. Turn
clockwise to elevate the table. Support lock must be
released before operating the crank.
TABLE LOCK - Locks the table after it is rotated to various
positions.
TABLE SUPPORT - Rides on the column to support the
table arm and table.
THREADED DRAIN (5/8") - Attach a 5/8" (pipe threaded)
metal pipe to the threaded opening for draining excess oil
into a quill container. For a non-draining surface, attach a
threaded metal plug. Pipe and plug not included.
WORKPIECE - Material being drilled.