Operator`s manual

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
no No Load Speed
'x, Alternating Current
.../min Per Minute
DESIG NATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rotational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits etc.,
per minute
[] Class II Construction Double-insulated construction
Safety a potential personal injury
Alert Indicates hazard.
To reduce the risk of injury, user must read and
Read Operator's Manual understand operator's manual before using this
product.
O Eye Protection Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Wet Conditions Alert Do not to rain in locations.
expose
or use
damp
i_ Risk of Injection
To reduce the risk of injection or injury, never
direct a water stream towards people or pets or
place any body part in the stream. Leaking
hoses and fittings are also capable of causing
injection injury. Do not hold hoses or fittings.
Kickback To reduce the risk of injury from kickback, hold
the spray wand securely with both hands when
the machine is on.
Electric Shock Failure to use in dry conditions and to observe
safe practices can result in electric shock.
5-English