Owner`s manual
TABLE OF CONTENTS
Introduction 2-5
Safety symbol and signal word review ..................... 2
Preparingyour garagedoor ............................. 3
Tools needed......................................... 3
Planning .......................................... 4-5
Carton inventory ...................................... 6
Hardware inventory.................................... 7
Assembly 8-11
Assemble the rail and attach the pulley bracket .............. 8
Install the trolley ...................................... 9
Attach the rail to the motor unit .......................... 9
Install the chain/cable and the sprocket cover .............. 10
Tighten the chain and cable ............................ 11
Installation 11-26
Installation safety instructions .......................... 11
Determine the headerbracket location .................... 12
Install the header bracket .............................. 13
Attach the rail to the headerbracket ...................... 14
Position the opener................................... 15
Hang the opener ..................................... 16
Install the door control ................................ 17
Install the light ...................................... 18
Attach the emergency releaseropeand handle.............. 18
Electrical requirements ................................ 19
Install the Protector System-_........................ 20-22
Fastenthe door bracket............................. 23-24
Connect the door arm to the trolley ................... 25-26
Adjustment 27-29
Adjust the travel limits ................................ 27
Adjust the force...................................... 28
Test the safety reversal system.......................... 29
Test the Protector System®............................. 29
Operation 30-34
Operationsafety instructions ........................... 30
Usingyour garagedoor opener ......................... 30
Usingthe wall-mounted door control ..................... 31
To open the door manually............................. 31
Careof your garagedoor opener ........................ 32
Havinga problem? ................................... 33
Diagnosticchart ..................................... 34
Programming 35-36
To add or reprogram a hand-held remote control ............ 35
To eraseall codes.................................... 35
3-function remotes................................... 35
To add, reprogram or change a KeylessEntry PIN ........... 36
Repair Parts 37-38
Rail assembly parts................................... 37
Installation parts ..................................... 37
Motor unit assembly parts ............................. 38
Accessories 39
Warranty
RepairPartsandService
39
Back Cover
INTRODUCTION
SafetySymbolandSignal WordReview
This garagedoor opener has beendesigned and tested to offer safe service provided it is installed, operated,maintained and tested in
strict accordancewith the instructions and warnings contained in this manual.
Mechanical
Electrical
Whenyou see theseSafety Symbols and Signal Words on the
following pages,they will alert you to the possibility of serious
injury or deathif you do not comply with the warnings that
accompanythem. The hazardmay come from something
mechanical or from electric shock. Readthe warnings carefully.
Whenyou see this Signal Word on the following pages,it will alert
you to the possibility of damageto your garagedoor and/or the
garagedoor opener if you do not comply with the cautionary
statementsthat accompany it. Readthem carefully.