Manual

Installation Step 5

Position the Opener

Follow instructions which apply to your door type

as illustrated.

SECTIONAL Door or ONE-PIECE Door with Track

A 2x4 laid flat is convenient for setting an ideal door-

to-rail distance.

• Raise the opener onto a stepladder

You will need help at this point if the ladder is not tall

enough.

• Open the door all the way and place a 2x4 laid flat on

the top section beneath the rail.

If the top panel hits the trolley when you raise the door,

pull down on the trolley release arm to disconnect the

inner and outer sections. The trolley can remain

disconnected until Step 13 is completed.

Rail 2x4

Foam

Packaging

_Trotley

ReIease Arm

ONE-PIECE Door without Track

• With the door fully open and parallel to the floor,

lneasure the distance from the floor to the top of the

door.

• Using a stepladder as a support, raise the opener to the

same distance as the door froln the floor (it will be at a

slight angle as shown).

• The top of the door should be level with the top of the

opener. Do not position the opener more than 3" above

this point.

Header

Bracket

Top of Door

Top of Opener

Packaging