Manual

Accessories Available For Your Opener
139.53702
/
139.53703
139.53404
53885
139.53709
Emergency Key Release:
Requ#vd for a garage with NO access
door. Enables homeowner to open
garage door lnanually froln omside by
disengaging trolley.
Outdoor Key Switch:
Operates the garage door
amomatically from ontside when
relnote control is not handy.
8 Foot Rail Extension
To allow au 8 foot door to open fatly.
Support Brackets:
For finished ceilings or where
additional support is required, based
on garage construction.
Includes brackets and fastening
hardware.
Door Clearance Brackets:
(For Sectional Dools' Only)
Replaces top brackets and rollers on
door to rednce height of door travel.
For use when installing opener in
garage with low headroom clearance.
139.53681
139.53680
139.53684
SECURITY+ 3-Function Remote
Control:
Includes visor clip.
SECURITY+ Compact 3-Function
Remote Control:
With loop for attaching key ring.
(Available April 1997)
SECURITY+ Keyless Entry:
Enables holneowner to operate garage
door opener froln omside by entering
a password. Also can add a temporary
password for visitors or service
persons. This temporary password
can be limited to a progralnmable
nulnber of hours or entries.
139.53686
Plug-In Light Control:
Enables homeowner to tnrn on a lamp,
television or other appliance from car,
bedside, or anywhere in the home
with a relnote. Available April 1997.
To Add the Keyless Entl T
We recommend that you program your password before
you install the Keyless Entl T. You wiU not need
assistance, and you can test the reception at the
mounting location before installation.
If you have a Premium Control Console:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers i]oln 0 to 9 (a
number can be used more than once, for example, 4, 0,
4, 1).
2. Press the four buttons for the password, then press and
hold the Enter button. The indicator light on the door
opener panel will blink.
3. Press and release the SRT (learn) button on the opener
panel. After the opener light flashes, release the Enter
button.
Test by pressing the password, then press Enter. The door
should begin to move.
38