Manual

Installation Step 9
Electrical Requirements
I
1:o reduce the riskof electric shock, your garage door
opener has a grounding type plug with a third
grounding pin. This plug will onlyflt intoa grounding
type outlet.
If the plug doesn't fit into the outlet you have, contact
a qualified electricianto installthe properoutlet.
I To avoid installation difficulties,
do not run the opener at this time.
Right Wrong
If permanent wiring is required by your local code, refer to the following procedure:
To make a permanent connection through the 718"
diameter hole in the top of the opener (according
to local code):
• Remove the opener cover screws and set the
cover aside.
• Remove the attached 3-prong cord.
• Connect the black (line) wire to the screw on the
brass terminal; the white (neutral) wire to the
screw on the silver terminal; and the ground wire
to the green ground screw. The opener must be
grounded.
• Reinstall the cover.
Ground Tab
Green
Ground
Screw
Permanent wiring
connection
Black
Wire
I To avoid installation difficulties,
do not run the opener at this time.
1R