Owner`s manual

APPLYING WAX/POLISH TO DURA FOAM TM PAD

For Liquid Waxes, Polishes

(See Figure 6)

1. Squeeze liquid wax/polish onto concave

center of pad in a circular pattern.

2. Set the switch to the "SS" (Smart Start)

position. The wax or polish will not

splatter as you start to apply. This

eliminates the need to continually turn

the switch "On" and "Off" during use.

For Paste Waxes, Polishes

(See Figure 7)

The patented Smart Start TM feature

combined with the 4-in. Dura FoamTM

pad allows you to place the pad directly

into a standard 11-oz. can of wax.

Here are 4 easy steps to loading the pad

with paste wax:

1. Set the switch to the "SS" (Smart Start)

position.

2. Place the foam pad into the can. The pad

will begin to turn as you apply slight

pressure and apply the wax directly onto

the pad.

3. Remove the pad from the wax can. The pad will automatically stop when

you stop applying pressure.

4. Place the pad on the surface to be polished. It will automatically start and

continue to operate as long as you keep pressure on the surface.