Operating instructions

Useofthistoolcangenerateanddisbursedustorother

airborneparticles,includingwooddust,crystallinesilica

dustandasbestosdust,Directparticlesawayfromface

andbody,Alwaysoperatetoolinwellventilatedarea

andprovideforproperdustremoval,Usedustcollec-

tionsystemwhereverpossible,Exposuretothedust

maycauseseriousandpermanentrespiratoryorother

injury,includingsilicosis(aseriouslungdisease),

cancer,anddeath,Avoidbreathingthedust,andavoid

prolongedcontactwithdust,Allowingdusttogetinto

yourmouthoreyes,orlayonyourskinmaypromote

absorptionofharmfulmaterial,AUwaysuseproperly

fittingNIOSH/OSHAapprovedrespiratoryprotection

appropriateforthedustexposure,andwashexposed

areaswithsoapandwater,

Fig. 22-1

Jointing and planing operations generate large amounts

of wood chips and dust, A dust collection system is rec-

ommended for your Jointer/Planer, Provided with your

Jointer/Planer is a dust chute port with a 4" diameter,

A 4" diameter dust collection hose and clamp (not

included) can be connected direct to the Jointer/Planer

for removal of the wood chips and dust,

if you do not have a dust collector a shop vacuum

with a 2-1/2" hose can be used, A reducer kit (not

included) is required to make proper connection from

the 2-1/2" hose to the dust chute port, This Dust

Collection Reducer Kit (4" to 2ol/2"), part number

OR90376 can be ordered through 1-800-4-MY-HOME,

You will have to tell the operator to look under the parts

list of this Jointer/Planer #21705,