Operating instructions

Hage ._J
4. If the meter reads _ , (right hand side of the scale) the
ballast resistor is open and must be replaced.
BLACK
CHRYSLER _,REGULAR
BALLAST --
.5 TO .6
,_ OHMS
OHMS "--I
BALLAST RESISTOR TEST CONNECTIONS
FIGURE 45
Test Number 26--lqnition Switch
The ignition switch performs many duties beyond starting the vehicle. With
the guidance of your vehicle service manual, your Craftsman Voltmeter and/or
Ohmmeter can confirm operation of the ignition switch,
Some of the ignition switch functions are as follows:
i. Activate starter relay (start position)
2. Bypass ignition ballast resistor (start position)
3, Confirm tell-tale cluster lights (start position)
4. Activate ignition
5. Activate accessories
If you have difficulty with any of the above circuits, the ignition switch
is a possible source of trouble. Consult your vehicle service manual for
exact diagnostic procedures.