Operator's Manual ® 10 Cu. Ft. Poly Cart STOP DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 Model No. 486.24489 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. • • • • • Safety Assembly Operation Maintenance Parts Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman PRINTED IN U.S.A. FORM NO.
TABLE OF CONTENTS WARRANTY & SAFETY...................................................2 FULL SIZE HARDWARE CHART.....................................3 CARTON CONTENTS......................................................3 ASSEMBLY.......................................................................4 OPERATION.....................................................................6 MAINTENANCE...............................................................6 SLOPE GUIDE.........................................
FULL SIZE HARDWARE CHART F (4) A (4) H (2) E (4) D (1) 47189 46980 I (2) G (9) 43012 47810 R19212016 B (8) HA21362 L (1) J (1) 43182 M (1) 47408 K (2) HA23638 C (2) 47622 25910 43001 O (1) N (2) 43343 47407 43010 CARTON CONTENTS 24386 24527 24497 40472 24498 23687 24908 27715 40880 3
ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY step 2: (see figure 2) • (1) Screwdriver (1) Pliers (2) 7/16” Wrenches (2) 1/2” Wrench (2) 9/16” Wrenches Hook the short end of the spring (M) into the hole in the latch lock lever. Use the spring puller tool (O) to hook the long end of the spring into the square hole in the tongue. The spring puller tool can be stored when finished. (M) step 1: (see figure 1) • Verify that all parts and all fasteners on page 2 are included in the carton and parts bag.
step 4: (see figure 4) • step 6: (see figure 6) Lay the tongue (open side facing up) onto the wheel support. Assemble the axle through the wheel support and the tongue. • 786.24489 Assemble the latch stand plate and the latch stand bracket at the front of the tray using four hex bolts (A) and hex nuts (F). The aligning tab on the bottom of the latch stand bracket must be towards the rear of the cart. Tighten.
OPERATION MAINTENANCE 1. At the beginning of each season, using a light machine oil, lubricate the latch, the latch pivot bolt, and the area of the axle where the draw bar tongue pivots. CAUTION: Vehicle braking and stability may be affected with the addition of an accessory or an attachment. Be aware of changing conditions on slopes. 2. Grease or oil the wheel bearings periodically. Use automotive wheel bearing type grease or 20 weight oil. 1.
(Keep this sheet in a safe place for future reference.) Use this guide to determine if a slope is safe for the operation of your tractor and cart. Refer also to the instructions in your vehicle owner’s manual. SLOPE GUIDE SIGHT AND HOLD THIS LEVEL WITH A VERTICAL TREE A POWER POLE A CORNER OF A BUILDING OR A FENCE POST FO L D A LONG DOTTE DL IN E , R EPRES ENTIN G A 1 0 DEGRE E SLO PE CAUTION: DO NOT OPERATE YOUR TRACTOR AND CART ON A SLOPE IN EXCESS OF 10 DEGREES.
REPAIR PARTS ILLUSTRATION MODEL 486.
REPAIR PARTS LIST MODEL 486.
Product questions or problems? 1-888-331-4569 Customer Care Hot Line Get answers to questions, troubleshoot problems, order parts, or schedule repair service. Para respuestas a preguntas o problemas, y ordenar piezas o pedir servicio para la reparación de su equipo. To help us help you, register your product at www.craftsman.com/registration Para poderte ayudar mejor, registra tu producto en www.craftsman.