Owner's Manual lO-in. Buffer / Polisher Model No. 172.10722 CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. • • • • SAFETY OPERATION MAINTENANCE ESPANOL, PAGE 13 Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Warranty. ............................................................ Page 2 Safety Instructions ........................................... Description ......................................................... Page Page 3-5 6 Operation ....................................................... Maintenance ...................................................... Accessories .......................................................
I I to follow all instructions listed below may result in electric shock, fire and/or WARNING: BE SURE to read and understand all instructions, Failure serious personal injury. I WORK AREA SAFETY 1. ALWAYS keep your work area clean and well lit. Cluttered and dark areas invite accidents. 2. DO NOT operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3.
PERSONAL SAFETY 1. ALWAYS stay alert, watch what you are doing and use common sense when operating a power tool. DO NOTuse tool while tired or under the influence of drugs, alcohol or medicabon. A moment of inattention while operating power tools may result in serious personal injury. 2. ALWAYS dress properly. DO NOT wear loose clothing or jewelry. Pull back long hair. Keep your hair, clothing and gloves away from moving parts. Loose clothing, jewelry or long hair can be caught in moving parts. 3.
TOOL USE AND CARE SAFETY 1. DO NOT force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 2. DO NOT use the tool if the switch does not turn it "On" or "Off". Any tool that cannot be controlled with the switch is dangerous and must be repaired. 3. ALWAYS disconnect the plug from the power source before making any adjustments, changing accessories or storing the tool.
Your Craftsman Buffer/Polisher has built-in features to make your job easier and more effic!ent. Theprecision-tuned counterweight system matches with the orbital motion for a "swirl-free shine. The perimeter handle system provides maximum balance, control and gripping comfort on any horizontal or vertical surface. It also includes a hook and loop strip to help keep extension cord securely plugged into buffer/polisher. Perimeter Handle System Fig.
BEFORE YOU BEGIN TO WAX, BUFF AND POLISH YOUR CAR: 1. Wash, clean and dry your vehicle. 2. Remove all road tar, excess grease spots and bug stains with a general-purpose cleaner. 3. Make sure the work area is dry. ATTACHING (See Figure THE WAX APPLICATOR 2) BONNET TO THE WARNING: When changing accessories, BE SURE that the switch is in the (OFF) position and the cord is unplugged. 1. Place wax applicator bonnet on foam pad as shown in Fig. 2. 2.
TOTURNBUFFER/POLISHER "ON" OR "OFF" Slide switch forward to turn tool "On", slide it backwards to shut tool "Off". Fig. 5 NOTE: After plugging tool into extension cord, loop extension cord over tool's stub length plug. Then wrap hook and loop strip around extension cord to secure it in place. IMPORTANT; Read, understand and follow all safety and user instructions in this manual and all directions and warnings on polishes and waxes.
APPLYING WAX ONTO SURFACE TO BE POLISHED cont. (See Figure 9) 9. Shut "Off" the buffer/polisher when you have finished applying wax with applicator bonnet. 10. Remove the wax applicator bonnet and use it to hand polish all the hard-to-reach surfaces (under bumpers, around door handles, etc.). (See Figure 9,) 11.
IMPORTANT: DO NOT apply excessive pressure against the work surface with this tool. The random orbital motion feature on this tool will perform better when less pressure is applied. Applyingexcessive pressure will slow the random orbiting motion and reduce the effectiveness of the tool. CAR CARE TIPS 1. Wash and polish the car 3 to 4 times a year to help ensure paint protection. 2. Wash the car at least every 2 weeks with a car wash solution which will not harm the finish or strip the wax.
1. Terry cloth bonnets can be machined washed in cold water, using a small amount of detergent. Then machine dried at medium temperature. HOWEVER, we recommend hand washing and air drying for longer bonnet life. 2. Wax applicator of properly. bonnets should only be used once, and then disposed 3. To prolong the life of the foam pad, ALWAYS the pad face up. store the buffer/polisher 4. Remove the bonnet from the foam pad when the buffer/polisher so the pad can dry out and retain its original shape. 5.
NOTES 12
Manual del Usuario Enceradora / Pulidora de 10 pulgadas. Modelo No. 172.10722 ATENCION: Antes de usar este proclucto, lea, comprenda y siga todas las reglas de seguridad y las instrucciones de funcionamiento incluidas en este manual. • SEGURIDAD • FUNCIONAMIENTO • MANTENIMIENTO Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Garantfa ................................................................ Instrucciones de Seguridad ................................ Page Page 14 15-17 Descripci6n ............................................................ Funcionamiento ................................................. Page 18 Pages 19-22 Mantenimiento ....................................................... Accesorios .............................................................
I instrucciones. El incumplimiento de todas las instrucciones indicadas a ADVERTENCIA: de leer y comprender todas las grave. continuaci6n puede resuitar ASEGURESE en choque el_ctrico, incendio y/o lesi6n personal SEGURIDAD EN EL LUGAR DETRABAJO 1. SIEMPRE mantenga el lugar de trabajo limpio y bien iluminado. Los bancos de trabajo desordenados y la falta de iluminaci6n favorecen los accidentes. 2.
SEGURIDAD PERSONAL 1, SIEMPRE mant_ngase alerta, observe Io que est,, haciendo y use sentido comun cuando est6 usando una herramlenta el6ctrica. NO use la herramienta cuando estd cansado o bajo la infiuencia de drogas, alcohol o medicinas. Un momento de distracci6n cuando estd trabajando con las herramientas eldctricas, puede ocasionar una lesi6n personal grave. 2. SIEMPRE use vestimenta adecuada. NO use ropas sueltas ni joyas. Atese el cabello largo.
USOY CUIDADODE LAS HERRAMIENTAS 1. NO fuerce la herramlenta. Use la herramienta correcta para el traba|o que estd realizando. La herramienta correcta realizard el trabajo mejor y de manera rods segura si se usa a la velocidad para la cual ha sido diseSada. 2. NO use la herram|enta si el interruptor no funclona debidamente, Es peligroso si la herramienta no puede set controlada con el interruptor y por Io tanto debe set reparada. 3.
Su enceradora/pulidoraCraftsmantiene caracteristicas incorporadas que facilitan y hacen mds eficiente su trabajo. El sistema de contrapeso ajustado a precisi6n armoniza con el movimiento orbital Iogrando un briUo "sin remolinos".
ANTES DE COMENZAR AUTOMOVIL: A PASAR LA CERA, LUSTRE Y PULA SU 1. Lave, limpie y seque su vehiculo. 2. Retire todo el alquitrdn proveniente del camino, rnanchas de grasa y manchas de insectos con un limpiador para todo uso. 3.
PARA ENCENDER ("ON") O APAGAR ("OFF") LA ENCERADORA/PULIDORA Deslice el interrupter hacia adelante a la posici6n "On" para encender la hen'a.mienta, deslfcelo hacia atrds la posici6n "Off para apagar la herramienta. NOTA: Despu6s de enchufar la herramienta en el cord6n de extensi6n, entrelace el cord6n de extensi6n en el enchufe del cable el_ctrico corto de la herramienta. Luego enrolle la cinta autoadherente alrededor del cord6n de extensi6n para asegurarlo en su lugar.
APLICACION DE LA CERA (Ver Figura 9) EN LA SUPERFICIE OUE SERA PULIDA 9. Apague la lustradora/pulidora cuando haya terminado de aplicar la cera con el bonete aplicador. 10. Retire el bonete aplicador de cera y (Jselo para pulir a mano aquellas superficies que son diffciles de alcanzai (debajo de los parachoques, alrededor de las manijas de las puertas, etc.). (Ver Figura 9.) 11. Descarte et bonete aplicador cera de manera apropriada.
IMPORTANTE: Con esta herramienta NO es necesario aplicar presi6n excesiva contra la superficie de trabajo. El movimiento orbital aleatorio de esta herramienta funciona mejor cuando se aplica menos presibn. Si se aplica presibn excesiva se har& mas lento el movimiento orbital aleatorio y se reducir& la efieacia de la herramienta. CONSEJOS PARA EL CUIDADO 1. Lave y pula el autom6vil DEL AUTOMOVIL 3 a 4 veces al aSo para proteger la pintura. 2.
1. Los bonetes de tela de toalla pueden ser lavados en la lavadora en agua frfa, usando una pequeSa cantidad de detergente. Despues sequelos en la secadora usando temperatura mediana. SIN EMBARGO, recomendamos que se laven a mano y se sequen al aire para prolongar la vida _til del bonete. 2. Los bonetes aplicadores de cera deben ser usados solamente una vez y luego descartarlos de manera apropiada. 3.
Your Home For repair in your home of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters, 1-800-4-MY-HOME (1-800-469-4663) www.sears.com ® Anytime,day or night (U.S.A. and Canada) www,sears.ca iiii!i_i!ili!_! Our Home ::::.