Owner`s manual

Your Compound Miter Saw has been shipped fully assembled,
except for the blade, miter lock handle, dust guide and dust bag.
1. Remove all packing materials from around your saw.
2. Carefully lift the saw from carton and place it on a level work surface.
The saw is heavy, so get help, if you need it, to help avoid injuring your back.
3. Do not discard the packing materials until you have carefully inspected
the saw for loose or damaged parts and successfully operated the saw.
4. This saw has been shipped with the saw arm secured in the down position.
To release the saw arm, push down on the top of the saw arm and cut the
tie wrap. Lift the saw arm by the handle.
IMPORTANT: Keep hand pressure on the saw arm while cutting
the tie wrap to prevent it from suddenly raising the wrapping iffully cut.
5. Carefully inspect all parts of the saw to make sure that no breakage
or damage has occurred during shipping.
/_WARNING: If any parts are missing, DO NOT operate this toot until
the missing parts are replaced. Failure to do so could result in possible
serious injury.
The following labels appear on your miter saw. These labels are there to
warn you of possible dangerous situations. Failure to follow the warnings
could result in serious injury.
Label # 1 (see fig. 1)
Label # 2 (see fig. 1)
Label # 3 (see fig. 1)
DANGER
KUP HANDS
AWAY
FROM
12