Owner`s manual

KNOWYOURSAW cont.
Carrying Handle (see fig. 6)
Yourmitersaw has a built-in carrying
handle on the topofthe saw armfor easy,
convenienttransportingfromonejob site
to another.Beforecarryingthe saw:
1. Shutolf the power and pulloutthe plug.
2. Lowerthe saw arm and lock itin
the down position.
3. To lock saw arm, push the lock pin.
Miter Lock Handle (see fig. 6)
The miter lock handlesecurelylocks
your saw at the desired miter angle.
Spindle Lock Button (see fig. 7)
The spindle lock button on yoursaw
allowsyou tolockthe spindlethatkeeps
theblade in yoursawfrom rotating,Only
depressand holdthe lockbutton when
installing,changingorremovingtheblade.
Trigger Switch (see fig. 7)
To turnon the saw, squeeze the
triggerswitch.Release switch
toshut off.
Positive Stops on Miter Table
The miter table has a miter scale that
is color coded 1or easy reading. It has
miter indexes at 0°, 15°, 22.5 °, 30° and
45° leftand right with positive stops at
0°, 15°, 22.5 °, 30° and 450 for exact
miter cuts.
17