Owner`s manual

ADDITIONAL SPECIFIC SAFETY RULES FOR MITER SAWS cont.

Z_ WARNING: Some dust partlcles created by power sanding,

sawing, grlndlng, drilllng and other construction jobs contain

chemlcals known to cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks and cement and other masonry products.

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending upon how often you do this

type of work. To reduce your exposure to these chemicals:

• Work in a well-ventilated area.

• Work with approved safety equipment, such as those dust

masks that are specially designed to filter out microscopic

particles.

Z_ WARNING: The operation of any saw can

result in foreign objects being thrown into your eyes,

which can result in severe eye damage. Before

beginning power tool operation, ALWAYS wear

safety goggles or safety glasses with side shield

and a full face shield when needed. We recommend

a Wide Vision Safety Mask for use over eyeglasses

or standard safety glasses with side shield, both available

at Sears Retail Stores.

SERVICE SAFETY

1. If any part of this miter saw is missing or should break, bend, or fail in

any way; or should any electrical component fail to perform properly:

ALWAYS shut off the power switch and remove the miter saw plug from

the power source and have the missing, damaged or failed parts

replaced BEFORE resuming operation.

2.Tool service must be performed only at a Sears Service Center. Service

or maintenance performed by unqualified personnel could result in a risk of injury.

3.When servicing a tool, ALWAYS use only identical replacement parts.

Follow instructions in the Maintenance Section of this manual. Use of

unauthorized parts or failure to follow Maintenance Instructions may create

a risk of electric shock or injury.