Manual

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which

eliminates the need for the standard 3-wire grounded power cord. All

exposed metal parts are isolated from the internal motor components with

protecting insulation. Double insulated tools do not need to be grounded.

IMPORTANT

The servicing of a tool with double insulation requires extreme care and

knowledge of the system and should be performed only by a qualified service

technician. For service, we recommend that you return the tool to your nearest

Sears Service Center for repair. ALWAYS use identical replacement

parts when servicing.

EXTENSION CORDS

The use of any extension cord will cause some loss of power.To keep the loss

at a minimum and to prevent overheating, use an extension cord that is heavy

enough to carry the current that the tool will draw.

A wire gauge (AWG) of at least 16 is recommended for an extension cord

100 feet or less in length. When working outdoors ALWAYS use an extension

cord that is suitable for outdoor use.The cord's jacket will be marked WA.

CAUTION: Keep extension cords away from the cutting area,

and position the cord so it will not get caught on lumber, tools, etc.

during the cutting operation.

WARNING: Check extension cords before each use. If damaged,

replace it immediately. NEVER use a tool with a damaged cord because

touching the damaged area could cause electrical shock, resulting in

serious injury.

Sears offers a large selection of extension cords that help extend your

working range.

The following

recommended

accessories are

currently

available at

your local

Sears Store.

7 1/4-in. 40-Tooth General-Purpose Cut-Off Blade

7 1/4-in. 35-Tooth Master Combination Blade

7 1/4-in. 200-Tooth Plywood Blade

7 1/4-in. 18-Tooth Carbide Blade

7 1/4-in. 18-Tooth Mach II Silver Series Carbide Blade

7 1/4-in. 24-Tooth Mach II Silver Series Carbide Blade

7 1/4-in. 24-Tooth Combination Carbide Blade

Rip / Edge Guide

I WARNING: The use of attachments or accessories that arenot recommended might be dangerous and could result in serious injury.