Owner's Manual

ManualsBrandsCraftsman ManualsLift EquipmentCraftsman 2 Ton Aluminum Jack

www.craftsman.com

Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A.

2 Ton Aluminum / Steel

Service Jack

Operator’s Manual

10 am - 7 pm, Central Time,

WARNING: Before using this product,

read this Operator’s Manual and follow

all its Safety Rules and Operating

Instructions.

Safety

Operation

Maintenance

Printed in China

Model 50102

Summary of content (7 pages)

PAGE 1
Operator’s Manual 2 Ton Aluminum / Steel Service Jack Model 50102 10 am - 7 pm, Central Time, WARNING: Before using this product, read this Operator’s Manual and follow all its Safety Rules and Operating Instructions. Safety Operation Maintenance Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. www.craftsman.
PAGE 2
AIR PURGE PROCEDURE IMPORTANT: BEFORE FIRST USE, perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of product shipment and handling. ASSEMBLE AND INSERT HANDLE See ASSEMBLY on page 3 to assemble handle. Loosen handle socket screw. Insert end of handle into handle socket. Tighten screw. TURN HANDLE CLOCKWISE Turn handle clockwise until it stops to ensure that release valve is closed.
PAGE 3
SAFETY INSTRUCTIONS Read Operating Instructions Study, understand and follow all instructions in this manual before operating the jack. Failure to heed these warnings may result in loss of load, damage to the jack and/or jack failure resulting in personal injury or property damage. Position the Jack This jack is designed only for lifting part of the total vehicle. Position the jack to only lift on the areas of the vehicle specified by the vehicle manufacturer.
PAGE 4
• Sufficiently loosen the Handle Socket Screw to insert the assembled handle (Picture 2). • Line up the square hole located at the bottom of the handle over the square bolt inside the Handle Socket. • Lower the handle onto the bolt. Secure the handle in place by tightening the Handle Socket Screw. Handle Socket Screw Pump Plunger Retaining Clip FEATURES & OPERATION Operation Raising the Jack • Block the vehicle's wheels for lifting stability.
PAGE 5
How it works With Release Valve Closed • An upward stroke of the jack Handle draws oil from the reservoir tank into the plunger cavity. Hydraulic pressure holds the valve closed, which keeps the oil in the plunger cavity. • A downward stroke of the jack Handle releases oil into the lift cylinder, which forces the power unit ram out. This raises the saddle.
PAGE 6
Oil Fill Plug No. 1 2 3 4 5 6 7 8 Description Q’TY 1 Saddle 1 Lifting Arm 1 Wall Plate Assembly 2 Front Wheel Rear Caster Assembly 2 1 Handle Assembly 1 Handle Socket 1 Power Unit Assembly Release valve is not completely closed. Turn handle clockwise. Air is in the hydraulics. Purge air from system. Low oil level. Add oil as required. Oil reservior is overfilled: Drain excessive oil. Lubricate moving parts. Power unit malfunctioning. Replace the power unit.
PAGE 7
For Help Line, Parts and Service: Call 10 am - 7 pm, CT, Monday - Friday 1-888-448-6746 Para la linea de ayuda, partes y servicio: Llame de 10am-7pm Lunes-Viernes 1-888-448-6746