Manual

2
Table of Contents
Introduction
Symbols and Icons 2
Inventory 3
Preparation / Tools Required 4
Assembly
Rail and Trolley Assembly 5
Installing the Belt 6-7
Important Installation Instructions 8
Mounting Header Bracket 9
Installation
Attaching Rail to Header Bracket and Mounting Door Bracket 10
Mounting Opener to Ceiling 11
Attaching Door Arms 12
Installing Light and Emergency Release Handle 13
Wiring
Wiring Instructions 14
Connecting Photo Eye Safety System 15
Connecting Door Control Console 16
Connecting Power 17
Adjustment
Aligning the Photo Eye Safety System 17
Travel Limit Adjustment– I. UP Limit 18
Travel Limit Adjustment– II. DOWN Limit 19
Auto Force Adjustment 20
Final Adjustment and Testing 21
Operation
Programming 3-Button Remote 22
Programming Keyless Entry Pad 23
Important Safety Instructions 24
Operating the Opener 25
Door Status vs. Activation 26
Backup Battery Installation / Battery and Status Indicator 27
Backup Battery Features / Motion-Sensing Light 28
Maintenance 29
Troubleshooting 29-30
Repair Parts and Service
Rail Assembly Parts / Installation Parts / Accessories 31
Opener Assembly parts 32
Warranty 33
DO NOT connect power
Please connect power
Symbols and Icons
!
WARNING
READ WARNINGS CAREFULLY to prevent SERIOUS INJURY or DEATH caused by
electrocution or mechanical hazard.
Installation hardware are
shown in actual size
*See Accessories in Repair Parts section of this manual for purchase information.
Beeps from built-in buzzer of the opener