Manual

28
Specification
Backup Battery Features
● LED indicators showing the battery and status.
● Built-in protection features: over current protection; short circuit
protection, overload protection, over-voltage protection,
over-charge protection.
● DC power jack for pre-charging or recharging with a plug-in
transformer.
Features
Dimension (L x W x H) 7.2’’ x 3.9’’ x 1.7’’
Fully Charge Time Suggested 24 hours
Recharging Input (DC Jack) 24VDC/1A
Cycle life Approx. 300 cycles
Operation Temperature
14°F - 122°F(-10°C-50°C)
!
WARNING
1. RISK OF EXPLOSIVE GASES:
• To reduce risk of battery explosion, follow ALL instructions and warnings on the battery pack
2. DO NOT touch eyes while working near batteries.
3. NEVER smoke or allow a spark or flame in the vicinity of battery or engine.
4. DO NOT drop ANY metal tools onto the battery. It might spark or short-circuit battery or other electrical part that may
cause explosion.
5. NEVER wear watches, rings, bracelets, or necklaces when working with car batteries. Batteries can produce a
short-circuit current high enough to weld a ring or the like to metal, causing a severe burn.
Motion-Sensing Light
The Motion-Sensing Light feature:
● The backup battery holster is equipped with a motion
detection sensor. The sensor will turn on the LED courtesy
light when ambient light is low and motion is detected. The
light will remain on for several minutes.
● During a power outage, the LED courtesy light will turn on
automatically upon door operation or when ambient light is
low.
Motion and Ambient Light Sensor
LED Courtesy Light