Owner`s manual

OPERATION
TRIM TAB ADJUSTMENT
Propeller steering torque may cause your boat to pull
in one direction. This steering torque results from
your outboard not being adjusted so the propeller
shaft is parallel to the water surface.The trimtab can
help compensate for this steering torque and can be
adjusted within limits to reduce any unequal steering
effort.
Note: Trim tab adjustment will have little effect reduc-
ing steering torque if the outboard is installed with the
anti-ventilation plate approximately 2 inches (50mm)
or more above the boat transom.
Operate your boat at normal cruisingspeed, with the
outboard set at the desired transom angle adjust-
ment. Tum your boat left and rightand note the direc-
tion the boat tums more easily.
If adjustment is necessary, loosen trim tab bolt and
make small adjustments at a time. If the boat turns
more easily to the left, move the trailing edge oftrim
tab to the left. If the boat turns more easily tothe right
move the trailing edge of trimtab to the right. Retigh-
ten boltand re-test.
-11 -