Owner`s manual

OPERATION
MOTOR OPERATING ANGLE ADJUSTMENT
IMPORTANT: ADJUST MOTOR TILT ANGLE, IF NECESSARY, BY CHANGING THE POSITION OF THE TRAN-
SOM ANGLE PIN SO THAT THE PROPELLER SHAFT IS PARALLEL TO THE SURFACE OF THE WATER
WHEN THE BOAT IS PLANING. SEE FIGURE 15 TO DETERMINE CORRECT MOTOR ANGLE.
PLOWING
ADJUST MOTOR ANGLE IF MOTOR IS TOO CLOSE TO TRANSOM I \
BOW WILL DIG IN OR PLOW. L_J
TRANSOM ANGLE PIN TOO LOW,
MOTOR TOO CLOSE
NORMAL
YOUR MOTOR SHOULD REMAIN VERTICAL
/
L
CORRECT
TRANSOM ANGLE PIN TOO HIGH,
MOTOR TOO FAR OUT
ADJUST MOTOR ANGLE, IF MOTOR IS TOO FAR AWAY FROM TRANSOM
THE BOW MAY RIDE HIGH, THE BOAT MAY uPORPOISE" AND THE MOTOR MAY RACE.
Figure 10
• Adjust motor angle if motor is too close to transom or bow it will dig in or plow.
• Adjust motor angle, if motor is too far away from transom the bow may ride high, the boat may "porpoise" and
the motor may race.
-12-