Operator’s Manual 4.5 Horse Power YARD VACUUM Model No. 247.770110 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. • Safety • ESAssembly • Operation • Maintenance • Parts • Español Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our Sears website: www.sears.com/craftsman Printed in U.S.A. FORM NO.
TABLE OF CONTENTS Content Page Content Page Warranty 2 Service and Adjustments 12 Safety 3 Storage 14 Assembly 5 Troubleshooting 15 Operation 7 Parts List 16 Maintenance 10 Español 25 WARRANTY Limited Warranty on Craftsman Yard Vacuum For one (1) year from the date of purchase, if this Craftsman Equipment is maintained, lubricated, and tuned up according to the instructions to the operator’s manual, Sears will repair or replace free of charge any parts found to be defective in materi
SAFETY WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.
i. Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.) j. To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil fuel spillage and remove any fuel soaked debris. k. Allow machine to cool at least 5 minutes before storing. 9. Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine.
ASSEMBLY NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position. See Figure 1. This Yard Vacuum has been completely assembled at the factory, except for the handle, bag, and blower chute. These parts are shipped loose in the carton. A pair of safety glasses and a 20-oz. bottle of engine oil are also included in the carton. See Figure 1. REMOVING UNIT FROM CARTON • • • • • Cut the corners of the carton. Remove all loose parts. Remove packing material.
• • • • Secure the two handles by tightening the upper wing nuts (carriage bolts must be seated properly into the handle). Remove the hairpin clips from the handle brackets and remove the carriage bolts and wing nuts from the lower handle. See Figure 3. Place the bottom holes in lower handle over the pins on handle brackets and secure with hairpin clips. Insert carriage bolts through upper hole in lower handle from the outside and secure with wing nuts.
OPERATION Know Your Yard Vacuum Read this operator’s manual and safety rules before operating your Yard Vacuum. Compare the illustrations below with your equipment to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. The operation of any Yard Vacuum can result in foreign objects being thrown into the eyes, WEAR YOUR SAFETY GLASSES which can result in severe eye damage.
GAS AND OIL FILL-UP WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition. Oil (one 20-oz. bottle shipped with unit) Only use high quality detergent oil rated with API service classification SF, SG, or SH. Select the oil’s SAE viscosity grade according to the expected operating temperature. Follow the chart below.
6. Standing behind the unit, grasp starter handle and pull rope out until you feel a drag. • 7. Pull the rope with a rapid, continuous, full arm stroke. Keep a firm grip on the starter handle. Let the rope rewind slowly. • 8. Repeat, if necessary, until engine starts. When engine starts, move throttle /choke lever gradually to START/RUN position. • • TO REMOVE BLOWER CHUTE 9. If engine falters, move control lever to CHOKE position, then back to START/RUN position. • 10.
PRODUCT MAINTENANCE SCHEDULE Be for ee ac hu se Af te r ea ch us e Fir st 5h ou rs Ev er y2 5h ou rs Ev er y5 0h ou rs Be fo r es to r ag e MAINTENANCE Lubrication Clean equipment ENGINE Check engine oil Change engine oil Service air cleaner Service spark plug Service muffler Clean engine GENERAL RECOMMENDATIONS CLEAN EQUIPMENT • • • • • • Always observe safety rules when performing any maintenance.
TO DRAIN OIL SERVICE SPARK PLUG Drain oil while engine is warm. Follow the instructions given below. • • • • • • Drain the gas tank, start the engine and let it run until the fuel line and carburetor are empty. Remove oil fill dipstick. Tip unit on its side to drain through the oil fill tube. When engine is drained of all oil, refill with approximately 20 oz. of fresh oil. Refer to Gas And Oil Fill-up in OPERATION section. Replace dipstick. Clean the spark plug and reset the gap to.
SERVICE AND ADJUSTMENTS WARNING: Do not at any time make any adjustment to the unit without first stopping engine and disconnecting spark plug wire. nearest Sears Service Center for repair and adjustment. WARNING: Do not attempt to alter the engine speed by tampering with the engine’s governor linkage. Doing so could result in serious personal injury and damage to the engine. The engine RPM has been set at the factory.
SHARPENING OR REPLACING CHIPPER BLADE • Because the engine on this unit has a tapered crankshaft, a special impeller removal tool (part number 753-0900) is required to remove the impeller assembly. For further assistance, contact your Sears Service Center. • NOTE: When tipping the unit, empty the fuel tank and keep engine spark plug side up. Chipper Blade • • • Remove lock nut that secures flail screen to the lower housing. The flail screen does not have to be removed. Refer to Figure 12.
STORAGE NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Prepare your Craftsman Yard Vacuum for storage at the end of the season or if the unit will not be used for 30 days or longer. A yearly check-up by your local Sears Service Center is a good way to ensure that the unit runs properly next season. • Add stabilizer to gasoline in fuel tank or storage container. • Always follow the mix ratio found on stabilizer container.
TROUBLESHOOTING Problem Possible Cause(s) Corrective Action Engine fails to start 1. Fuel tank empty or stale fuel. 1. Fill tank with clean, fresh gasoline. Fuel will not last over thirty days unless a fuel stabilizer is added. 2. Connect wire to spark plug. 3. Obstruction lodged in impeller. Disconnect spark plug wire and remove lodged object. 4. Move CHOKE to ON position. 5. Clean fuel line. 6. Prime engine. 7. Clean, adjust gap, or replace. 8.
PARTS LIST Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.
Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110 Ref. No. 1. 2. 3. 4. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 39. 40. Part No.
Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.
Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110 Ref. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 37. 38. Part No.
Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.
Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 Ref. No. 1. 2. 6. 7. 12A. 14. 15. 16. 17. 18. 19. 20. 30. 40. 41. 42. 43. 45. 46. 48. 50. 52. 69. 70. 72. 72A. 73. 75. 80. 81. 82. 83. 86. 89. 90. 92. 93. 100. 101. 103. 104. 110. 110A. 119. 120. 125. 126. 130. 135. 150. 151. 151A. Part No.
Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.
Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 Ref. No. 1. 2. 3. 4. 5. 6. 7. 10. 11. 14. 16. 17. 18. 20. 20A. Part No. 631615 631767 640278 631184 631183 640070 650506 630973 632045 640150 631807 651025 630766 640027 640053 Ref. No.
Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 11 13 12 8 9 7 7 6 Ref. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 11. 12. 13. Part No. 590599A 590600 590696 590601 590697 590698 590699 590700 590694 590695 590535 590701 Part Description Spring Pin Washer Retainer Washer Brake Spring Starter Dog Dog Spring Pulley & Rewind Spring Assy. Recoil Starter Starter Housing Assy. Starter Rope Starter Handle 6 3 4 5 2 1 14 11 1 12 Ref. No. 1. 3. 6. 7. 8. 11. 12. 13. 14.
CONTENIDO Contenido Página Contenido Página Garantía 25 Servicio y ajustes 35 Seguridad 26 Almacenamiento 38 Montaje 28 Localización de averías 39 Operación 30 Lista de repuestos 16 Mantenimiento 33 GARANTIA Garantía de un año sobre la aspiradora para jardines Craftsman Por un período de un año a partir de la fecha de compra, Sears reparará gratis cualquier defecto en el material o fabricación de esta aspiradora para jardines Craftsman, siempre y cuando haya sido mantenida, lubricada y
SEGURIDAD ADVERTENCIA: Este símbolo indica instrucciones de seguridad muy importantes las que, si no se siguen, podrían poner en peligro la seguridad personal y/o causar daños físicos. Antes de intentar manejar esta aspiradora para jardines, se debe leer y seguir todas las instrucciones que aparecen en este manual. Si no se cumplen estas instrucciones se corre el riesgo de sufrir lesiones. Cuando en el manual aparece este símbolo, respetar su advertencia.
• • • • • • • • SERVICIO piedras, pedazos de vidrio o de metal) y sean lanzados por la boca de descarga. Al elevar la boquilla a la posición más alta también incrementa la admisión de aire para lograr mejor funcionamiento del soplador. No intentar nunca retirar o vaciar el recolector mientras el motor está funcionando. Apagar el motor y esperar hasta que el rotor esté detenido antes de retirar el recolector (bolsa). El rotor continúa girando por algunos segundos después de apagar el motor.
MONTAJE NOTE: Para determinar los lados derecho e izquierdo de la aspiradora para jardines, situarse detrás de la máquina, en posición de manejarla. Ver la figura 1. La aspiradora para jardines fue armada en la fábrica, con la excepción del manillar, recolector y tubo de soplado. Estos componentes se envían sueltos en la caja de cartón. En la caja también se incluyen anteojos de seguridad y una botella de 20 onzas de aceite para motor. Ver la figura 1.
• • Retirar las chavetas de las escuadras del manillar y los tornillos de carruaje (cabeza de hongo y cuello cuadrado) y tuercas de mariposa del manillar inferior. Ver la figura 3. Colocar el manillar inferior sobre los pasadores en las escuadras y fijarlos con las chavetas, tornillos de carruaje y tuercas de mariposa. • • • Tuercas de mariposa Tornillo de carruaje Chaveta de soporte de montaje como el apalancamiento deslizando la barra que se cierra. Ver la figura 4.
OPERACION Conozca su aspiradora para jardines Lea este manual del operador y las reglas de seguridad antes de manejar su aspiradora para jardines. Compare las ilustraciones presentadas más abajo con su equipo para que conozca bien la ubicación de los distintos controles y ajustes. Guarde este manual para consultarlo en el futuro. USE SUS El manejo de cualquier aspiradora para jardines sopladora puede causar el lanzamiento de ANTEOJOS DE objetos extraños contra los ojos y lesionarlos gravemente.
LLENADO DE GASOLINA Y ACEITE • Aceite (una botella de 20 onzas enviada con la máquina) Usar únicamente aceite detergente de buena calidad clasificado con la clasificación de servicio SF, SG o SH de la API. Escoger el grado de viscosidad SAE del aceite de acuerdo con la temperatura de trabajo anticipada. Guiarse por el gráfico siguiente.
3. Cerciórese de que alambre del interruptor de bag/chute esté conectado con el motor y que puesto a tierra al corchete de montaje. 4. El depósito de gasolina se debe llenar 3/4 por completo antes a empezar. 5. Cuando la temperatura es sobre 32°F (0°C): • Mover la palanca de estrangulador/control del acelerador a la posición RAPIDO. • Presione el bulbo superelegante firmemente con su pulgar tres veces. Espere cerca de dos segundos entre cada empuje.
ADVERTENIA: Mantener las manos lejos de la abertura de la boquilla y NUNCA poner las manos ni los brazos dentro del tubo de astillado cuando el motor está funcionando. Se corre el riesgo de sufrir graves lesiones. ADVERTENCIA: Antes de usar la aspiradora para jardines, siempre examinar a fondo el lugar donde se va a pasar la aspiradora. Si se pasa por encima de obstrucciones, tales como juguetes pequeños, se puede causar lesiones personales como también dañar la máquina.
LUBRICACION • • • Ruedas - Una vez en la temporada, colocar unas pocas gotas de aceite SAE 30 en cada tornillo de reborde. Ver la figura 13. Palancas de ajuste de altura de la boquilla Lubricar estas palancas con aceite ligero. Ver la figura 6. Varilla de fijación - Lubricar la varilla y los resortes de compresión que se encuentra fijados a la escuadra de montaje. Ver la figura 4. • SERVICIO DEL FILTRO DE AIRE El filtro de aire impide la tierra, polvo, etc.
SERVICIO DEL SILENCIADOR LIMPIEZA DEL MOTOR • • • Inspeccionar el silenciador periódicamente y reemplazarlo cuando sea necesario. Si el motor tiene un chispero, retirarlo cada 50 horas de uso para limpieza e inspección. Reemplazarlo si está dañado. • WARNING: No manejar la aspiradora para jardines sin que tenga instalado el silenciador. No estorbar el sistema de escape. El silenciador o chispero dañado puede crear un peligro de incendio.
• • • Apagar el motor. Asegurarse que la máquina está totalmente detenida. Desconectar el cable de la bujía y conectarlo a tierra antes de desatascar el tubo de descarga. Ver tener acceso a la rejilla de trituración, retirar el recolector o el tubo de soplado de la máquina como se indica en la sección OPERACION. Ver la figura 12. • • Desconectar el cable de la bujía y conectarlo a tierra.
• Carcasa superior Cuchilla astilladora Conjunto rotor • • • Retirar la cuchilla astilladora utilizando para ello una llave allen de 3/16" en el exterior de la cuchilla y una llave de 1/2" en el lado inferior del rotor. Reemplazar o afilar la cuchilla astilladora. Para afilar la cuchilla, protegerse las manos con guantes y seguir el ángulo original de afilado. Volver a ensamblar ejecutando los pasos previosos en orden inverso. • Apretar los tornillos de la cuchilla a 210 - 250 pulg-lbs.
ALMACENAMIENTO Preparar la aspiradora para jardines Crafstman para su almacenamiento al final de la temporada o si la máquina va a estar sin usar durante 30 días o más. Una revisión anual por el centro de servicio Sears local es una buena manera de asegurar que la máquina funcione perfectamente la temporada siguiente. NOTE: El uso de un estabilizador de combustible es una alternativa aceptable para reducir la formación de depósitos gomosos de combustible durante el almacenamiento.
LOCALIZACION DE AVERIAS Problema Causas posibles Solución El motor no arranca 1. El tanque de combustible está vacío o combustible está viejo. 1. Llenar el tanque con gasolina limpia y fresca. El combustible no durará más de treinta días a menos que se le añada un estabilizador. 2. Conectar el cable de la bujía. 2. El cable de la bujía está desconectado. 3. No se puede tirar de la cuerda de arranque. 4. El estrangulador está en la posición ON (conectado). 5. La bujía está mala. 6.