Operator's Manual ® 1100 Series Engine Chipper Shredder Model No. 247.776370 • SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST ESPAIMOL CAUTION: Before using this product, read this manual and follow all safety rules and operating instructions. Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our web site: www.craftsrnan.corn FORMNO.
WarrantyStatement .................................. Page2 RepairProtectionAgreement ................... Page3 SafeOperationPractices......................... Pages4-5 SafetyLabels............................................ Page7 Assembly .................................................. Pages8-11 Operation .................................................. Pages12-13 One Year Full Warranty ServiceandMaintenance ......................... Pages14-17 Off-SeasonStorage ..................................
Congratulationson makinga smartpurchase.YournewCraftsman® productis designedand manufacturedfor yearsof dependableoperation. But likeall products,it mayrequirerepairfrom time to time.That's whenhavinga RepairProtectionAgreementcansave you moneyand aggravation.
Thismachine wasbuilttobeoperated according totherules for inthismanual. Aswithanytypeofpower equipment, which, ifnotfollowed, could endanger thepersonal safeoperation __1, Thissymbol points outimportant safety instructions orerroronthepartoftheoperator canresult inserious safety and/or property ofyourself andothers. Read carelessness andfollow allinstructions inthismanual before injury. Thismachine iscapable ofamputating hands andfeetand throwing objects.
OPERATION MAINTENANCE . • Nevertamperwith safetydevices.Checktheir properoperation regularly. . Check bolts andscrewsfor proper tightnessat frequentintervalsto keep the machinein safe workingcondition.Also, visuallyinspectmachinefor any damageand repair,if needed. Beforecleaning, repairing,or inspecting,stop the engine and make certain the impellerand all moving parts havestopped.Disconnectthe spark plug wire andground it againstthe engineto preventunintended starting.
This page left intentionally blank.
TO AVOID SERIOUS TO AVOID SERIOUS iNJURY: Do not operate on uneven ground unstable. Do not operate other hard surfaces and cause injury. • where unit is on pavement, gravel or since objects Read the owner's using unit. Keep all shields Keep hands, muffler. blades Chute away from area of safety glasses, gloves and ear feet, face, Hopper, while in place from these injury may bounce protection.
f IMPORTANT:This unit is shippedwithoutgasolineor oil in theengine. Be certain to serviceenginewith gasolineand oil as instructedin the separateenginemanualbeforeoperatingyourmachine. m NOTE:Referenceto rightand left hand sideof the YardVacuumis observedfrom the operatingposition. OPENING CARTON 1. Cut eachcornerof the cartonverticallyfrom topto bottom. 2. 3. Removeall looseparts. Removeloosepackingmaterial. REMOVING UNiT FROM CARTON 1.
ATTACHING 1. 2. THE CHUTE f DEFLECTOR a. Removethewing knobsfrom eachside of the lowerimpeller housing.SeeFigure3. b. Removethe hexlock nut, spacers,and hexbolt from the topof the impellerhousing. a. Align the chutedeflectorin positionon the dischargeopening and insert hex boltwith spacerthroughhingeon chute deflector(spacersfit insideof hinges).See Figure4. b. Placesecondspaceroverhex bolt insideotherhinge and securewith hex lock nut. c.
3, a. Align the chipperchute overthe weldstuds,so the slot in the bottomof the chute isfacing down.See Figure6. b. Securechipperchute withthe threecuppedwashers(cupped side againstthechipperchute)and hexnuts previously removed.Do nottightenthe nutsat this time. The chippershredderwas shippedwith one end of the support bracealreadysecuredto the lowerframe.Loosenbutdo not removethe boltssecuringthe braceto the frame. a.
f Hopper Assembly ReleaseRod Gas Fill Chipper ,____Chute Deflector J Figure9 Nowthat youhaveset up your chippershredderfor operation,get aquaintedwith its controlsand features.These are describedbelow and illustratedon this page.This knowledgewill allowyouto use your newequipmentto its fullestpotential. CHIPPER CHUTE Allowstwigsand small branchesup to 3" in diameterto be fed into the impellerfor chipping.See Figure9. HOPPER THROTTLE CONTROL This levercontrolsthe enginespeedand stop function.
f GAS AND OIL FILL=UP Oil (one bottle shipped with unit) FirstTime Use 1. 2. Removeoil fill dipstick. With thechippershredderon levelground,usea funnelto empty entirecontentsof oil bottle providedintothe engine. 3. Replaceoil fill dipstickand tighten. Subsequent Uses Onlyuse high qualitydetergentoil ratedwith APIserviceclassification SF,SG,or SH. Selectthe oil's SAEviscositygradeaccordingto the expectedoperatingtemperature.Followthe chart below. "Colder _ 32°F _Warrn_" ( Figure10 _._.
NOTE:A noisewillbe heardwhenfindingthestart of the compression cycle.This noiseis caused bythe flails and fingers,which are part of the shreddingmechanism,and it shouldbe expecteduntilthe impeller reachesfull speed. 6. 7. Pullthe rope with a rapid,continuous,full arm stroke.Keepa firm grip on the starterhandle.Letthe rope rewindslowly. Repeat,if necessary,until enginestarts.When enginestarts, move chokecontrolgraduallyawayfrom thethrottlecontrol. 8.
f Electrode Porcelain Alwaysstop engineand disconnectsparkplug wire beforeperforminc I anymaintenanceor adjustments.Alwayswearsafety glassesduring [operationor whileperformingany adjustmentsor repairs. GENERAL ,, ,, ,, ,, RECOMMENDATIONS Alwaysobservesafetyruleswhen performing anymaintenance. Thewarrantyon this chippershredderdoes notcover itemsthat havebeensubjectedto operatorabuseor negligence.To receive full valuefrom warranty,operatormustmaintaintheequipmentas instructedhere.
Change Engine Oil ,, Onlyuse high qualitydetergentoil ratedwith APIservice classificationSF,SG,or SH. Selectthe oil'sSAE viscositygrade accordingto the expectedoperatingtemperature.Referto operationsectionfor viscositychart. ,, Changeengineoil after thefirst five to eight hoursof operation, and everyfifty hoursor every seasonthereafter.Changeoil every twentyfive hourswhenoperatingengineunder heavyload or in high temperatures. To Drain Oil 1. 2. 3.
f /, / / Beforeperformingany type of maintenanceon the machine,wait for all parts to stop movingand disconnectthe spark plugwire. Failure I to followthis instructioncouldresult in personalinjuryor property |damage. REMOVING THE FLAIL / / / SCREEN If the dischargearea becomesclogged, removetheflail screenand cleanarea as follows: 1. 2. 3. Stopthe engine.Make certainthe chippershredderhascometo a completestop. Disconnectspark plug wirefrom sparkplug and groundagainst theengine. a.
SHARPENING DER BLADE OR REPLACING f THE SHRED= 1. Stopthe engineand makecertain that all movingparts have cometo a completestop. 2. 3. 4. Disconnectthe spark plugwire and groundagainstthe engine• Lowerthe hopperassemblyand block up the housing. Removethe six hexlock nuts and flat washersfromthe weld 5. studson the flail housing.Retainthe hardware.
Neverstore chippershredderwith fuelin tank indoorsor in poorly ventilatedareaswherefuel fumesmay reachan open flame,spark, or pilot lightas on a furnace,water heater,clothesdryer,or gas appliance. PREPARING THE ENGINE PREPARING Forenginesstoredover30 days: 1. To preventgumfrom formingin fuelsystemor on carburetor parts,run engineuntil it stopsfrom lack offuel or add a gasoline additiveto the gas in the tank.
Beforeperforminganytype ofmaintenance/service, disengageall controlsand stoptheengine.Waituntilall movingpartshavecometo a completestop.Disconnectsparkplugwireandgroundit againstthe engineto preventunintendedstarting.Alwayswearsafetyglassesduring operationor whileperforminganyadjustments or repairs. This sectionaddressesminor serviceissues,To locatethe nearestSears Service Center or to schedule service,simply contactSears at 1-800-4-MY-HOME®. Enginefails to start 1.
Chipper Shredder -- IVlodel No. 247.
Chipper Shredder -- IVlodel No. 247.776370 D _ Q m D _ 0 Q 710-3008 Hex Cap Screw5/16-18x.75 23. 736-0247 Flat Washer3/8 x 1.25 24. 742-0571 ShredderBlade 736-0217 LockWasher,3/8 2. 714-0149B Cotter Pin 3. 681-0048 4. 681-0094 Chute DeflectorAssembly 25. 710-1254 Hex Cap Screw3/8-24 x 2.25 5. 711-0835 Clevis Pin 26. 681-0004A OuterImpellerHousingAssembly 6. 781-0457 2_ 710-0825 Hex Cap Screw1/4-20x 3.75 7. 726-0211 U-Nut5/16-18 28.
Chipper Shredder -- IVlodel No. 247.
Chipper Shredder -- IVlodel No. 247.776370 D _ 728-0175 Pop Rivet 2 731-1899 ChipperShredderChute 3 735-0249 4 781-0633 5 681-0068A 6 710-0751 7 712-3027 8 710-0106 9 736-0173 10 736-0242 11 712-3010 12 749-1004 13 712-3004A O Q 710-0805 Hex Cap Screw5/16-18x 1.50 15 736-0170 Bell Washer5/16x 1.0 i Chute Flap 16 736-0366 Flat Washer IChute FlapStrip 17 738-0813 Axle Assembly ChipperChuteAssembly 18 737-0195 ElbowFitting HexCap Screw1/4 -20 x.
Craftsman 11 O0 Series Engine Model No. 150112 For Chipper Shredder Model 247.
Craftsman 1100 Series Engine Model No. 150112 For Chipper Shredder Model 247.776370 91_ 366_ 914A_ 914B '_ 1022_@ 977 CARBURETOR 51 GASKET 163_ 951¢ SET 633 137 0 633A 9_3°_166 _ 276G !_J_ 4_ lO_ 975_137_ 276@ 121 CARBURETOR 366 773 222 _ 427_ 104 q% 1270 OVERHAUL __] KIT 276@16 3_ 633A S 271 _ _ 137 0 633@ 51 334 __ I 48 SHORT BLOCK I 1329 REPLACEMENT 621_ _' 1319 WARNING LABEL 1058 OPERAS I ENGINE REQUIRED when replacing parts with warning labels affixed.
Craftsman 11 O0 Series Engine Model No. 150112 For Chipper Shredder Model 247.
Craftsman 1100 Series Engine Model No. 150112 For Chipper Shredder Model 247.
Craftsman 11 O0 Series Engine Model No. 150112 For Chipper Shredder Model 247.
Craftsman 1100 Series Engine Model No. 150112 For Chipper Shredder Model 247.
(This pageapplicablein the U.S.A.and Canadaonly.) Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board (CARB) and the United States Environmental Protection Agency (U.S.
Look For Relevant Emissions Durability Period and Air index information On Your Engine Emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and the Air Index. Sears, Roebuck and Co., U.S.A. makes this information available to the consumer on our emission labels.
Declaraci6n de garantia ...................... Acuerdo de Protecci6n Para Reparaciones ....................................... PrActicas operaci6n seguras ............... Montaje ................................................ Operaci6n ............................................ Garantia completa PAgina 36 Servicio y Mantenimiento .................... PAginas 48-53 Almacenamiento fuera de temporada.... PAgina 54 Soluci6n de problemas ...................... PAgina 55-56 Etiquetas de seguridad ........
Felicitacionespor haberrealizadouna adquisici6ninteligente.El productoCraftsman@que ha adquiridoest,. disehadoy fabricado parabrindar muchosahosde funcionamientoconfiable.Perocomo todos losproductosa vecespuederequerirde reparaciones.Esen ese momentocuandoel disponerde un Acuerdode protecci6npara reparacionesle puedeahorrardineroy problemas.
Esta maquinafue construidapara ser operadade acuerdocon las reglas de seguridad contenidasen este manual.AI igual quecon cualquiertipo de equipo motorizado,un descuidoo error por partedel operadorpuede producirlesionesgraves.Esta maquinaes capazde amputarmanos y pies y de arrojar objetoscon gran fuerza. Deno respetarlas instruccionesde seguridadsiguientesse puedenproducirlesionesgraveso lamuerte.
OPERACION MANTENIMIENTO • ,, Nuncamanipulelosdispositivosde seguridadde manera imprudente. Controleperi6dicamenteque funcionende formaadecuada. ,, Controlefrecuentementequetodos lospernosy tornillosesten bien ajustadosparacomprobarque la ma.quinase encuentraen condiciones segurasde funcionamiento.AdemAs,realiceuna inspecci6nvisual de la maquinapara controlarsi la mismaestAdahaday reparelade ser necesario.
r IMPORTANTE:Esta unidadse enviasin gasolinani aceiteen el motor. Antesde operar la maquinacargueel motorcongasolinay aceite comose indicaen el manualseparadodel mismo. NOTA:Las referenciasa los ladosderechoe izquierdode la aspiradora para patiosse hacenobservandola m_tquinadesdela posici6n de operaci6n. APERTURA DE LA CAJA DE CARTON 1. Cortecada una de las esquinasde la cajaverticalmente,de la partesuperiora la base. 2. 3. Saquetodas laspiezassueltas. Quiteel materialde empaquesuelto.
COLOCACl6N DEL CANAL DEFLECTOR 1. f a. Saquelas perillasa mariposade los costadosde la caja inferiordel motor. b. Saquela tuercade seguridadhexagonal,los separadoresy el bul6n hexagonalde la partesuperiorde la cajadel motor.Vea la Figura3-3. 2. a. Pongaen linea el canaldeflectoren su posici6nen la abertura de descargae inserteel bul6n hexagonalconel separadora travesde la bisagradel canaldeflector(los separadoresvan dentrode lasbisagras).Yea la Figura3-4. b.
3, a. Pongaen Ifneael canalde la cortadorapor encimade los esp_.rragos de la soldadurade maneraque la ranuraen la base del canalmire haciaabajo. b.Ajuste el canal de la cortadoracon tres arandelascurvas (conel lado curvocontrael canalde la cortadora)y con las tuercashexagonalesque habiasacadoanteriormente.No ajustelas tuercasen este momento.Vea la Figura6. La cortadoratrituradorafueenviadacon un extremode la / ,/ / / / // / i / / // j s'/ //' / // / trabade sostenya unidoal bastidorinferior.
Montaje de la tolva Varilla de Llenado de aceite Llenado de combustible Canal de cortadora Deflector del canal J Figura9 Ahoraque ya ha ajustadosu cortadoratrituradoraparasu funcionamiento,familiaricesecon sus controlesy caracteristicas.Estosse describeny se ilustranen esta p_.gina.Este conocimientole permitir_t utilizarsu nuevoequipo a su maximacapacidad. CANAL DE LA CORTADORA Permiteque las ramaspequeSasde hasta3" de di_tmetroingresenal motorpara ser picadas.Veala Figura9.
LLENADO DE GASOMNA Y ACEITE f --,, Aceite (se envia una botella junto con la unidad) Primeruso 1. 2. Saquela varilladel nivelde aceite. Con la cortadoratrituradoraal niveldel suelo,utilice un embudo para vaciardentrodel motortodoel contenidode la botellade aceitesuministradacon la unidad. 3. Vuelvaa colocarla varillade Ilenadode aceite y ajOstela. Usos postedores Use solamenteun aceite detergentede alta calidadcuya clasificaci6n de servicioAPIsea SF,SG o SH.
3. 4. 5. Permitaque el materialque se encuentraen la tolvasea atraido hasta las cuchillasy trituradoantesde agregarmasdesechos dentrode la misma.De no hacerlose puedetaparla tolva,el deflectordel canalo detenerel motor. Muevael controldel obturadorhaciael control del reguladorl,_l para obturarel carburadordel motor.(Si el motorest,. tibio la obturaci6npuedeno ser necesaria).Yeala figura10.
r?- 3 Siempredetengael motory desconecteel cablede la bujia antes de hacercualquiertipode mantenimientoo ajustes.Utilicesiempre pnteojos de seguridaddurantela operaci6no mientrasajustao [reparaesteequipo. RECOMENDACIONES ,, ,, GENERALES Respetesiemprelas reglasde seguridadcuandorealicetareas de mantenimiento. II II La garanfiade esta cortadoratrituradorano cubreelementosque han estadosujetosal real usoo negligenciadel operador.
la linea LLENAen la varillade aceite. Cambio • edor del motor. Del Aceite Del Motor ,, Use solamenteun aceite detergentede alta calidadcuya clasificaci6nde servicioAPI seaSF,SG o SH. Seleccioneel gradode viscosidadSAEdel aceitesegQnla temperaturade operacbnesperada.Consultela secci6nde operaci6npara ver la tablade viscosidad. Cambieel petr61eode motordespuesde lascinco a ocho primerashorasde la operaci6n,y cadacincuentahoraso cadatemporadaa partirde entonces.
el motor. 3. f --,, a. Retire la bolsay dos perillasa mariposaa cadalado del canal deflector.Vea la Figura13. // / / /' / b. Levanteel canaldeflectorparamantenerlofueradel paso. c. Saquelos dosbrochesde horquillade cadapasadorde horquillaque se extiendecruzandola cajay saquelos pasadores. 4. 5. ii / // // / / // ///" d. Saque la pantallade desgranadodel interiorde la cajay limpie la pantallacepill_.ndolao lav_mdolaconagua.Vea la Figura13.
f NOTA:Cuandovuelvaa montarla placade sostencompruebeque la aletagrabadamirehaciaadentrohaciael motor. 6. Saquelas dos perillasa mariposaque unenel canaldeflectory levb.ntelo. 7. Inserteun tubo de 1/2"o 3/4" de di_tmetroa travesde la pantalla de desgranadohaciael interiordel motorpara evitar que el mismogire o saquela pantallade desgranadoe inserteun trozo de maderaen la aberturadel canal. 8. a.
Nuncaalmacenecortadoratrituradoracon el combustibleen el tanquedentroo en _treasmalventiladasdondelos vaporesde combustiblepuedenalcanzaruna llamaabierta, la chispa,o el pilotocomo en un homo,calentadorde agua, secadorde ropa,o aplicaci6nde gas. PREPARACl6N DEL MOTOR LA PREPARACl6N Ya que los motoresalmacenaronm_tsde 30 dfas: 1.
realizarcualquiertipo del mantenimiento/servicio, sueltetodos los mandosy pareel motor.Esperehastaque todas las partesde novimientohayanvenidoa una paradacompleta.Desconecteel alambrede bujfay b_tselocontrael motorpara prevenirel comienzoinvolunario.SiempreIlevepuestoscristalesinastillablesdurantela operaci6no realizandocualquierajusteo reparaciones. Esta secci6nee dirigea cuestionesde eerviciomenores.
luier tipodel mantenimiento/servicio, sueltetodos los mandosy pare el motor.Esperehastaque todas las partesde Ilevepuestoscristalesinastillablesdurantela operaci6no realizandocualquierajuste o reparaciones. Esta secci6nee dirigea cuestionesde eerviciomenores. Localizarel m_ecercanoChamuecael Centrode Servicio o programarel eervicio,eimplementeponereeen contactoChamuecaen 1-800-4-MY-HOME®. . El motorrecalienta = @ @ 1. 2. El nivelde aceitedel motores bajo Flujode aire restringido 1. Lleneel c_.
(Esta p_tginase aplica s61oen EE.UU. y CanadA). and Co., LI.S.
Busque el periodo de duracion de emisiones importantes yla informaci6n la etiqueta de emisiones de su motor de clasificacion de aire en Los motores cuyo cumplimiento con los est&ndares de emisi6n Tier 2 de la Comisi6n de Recursos Ambientales de California (CARB) est6 certificado deben exhibir la informaci6n relacionada con el periodo de duraci6n de las emisiones y la clasificaci6n de aire. Sears, Roebuck and Co.
For expert home solutions advice: www.managemyhome.com Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest Sears Parts & Repair Service Center 1-800-488-1222 (U.S.A.