Operator's Manual I:Rl FI'SlVl N 1450 Series Engine Chipper Shredder Model No. 247.77638 For questions, call 1-800-4-MY-HOME ,, SAFETY * ASSEMBLY * OPERATION * MAINTENANCE * PARTS LIST . ES PAI'i,IO L CAUTION: Before using this product, read this manual and follow all safety rules and operating instructions. Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our web site: www.craftsman.com FORM1/O.
WarrantyStatement .................................. Pace2 SafeOperationPractices .......................... Paces 3-6 SafetyLabels............................................ Pace7 Assembly .................................................. Paces 8-11 Operation .................................................. Paces 12-13 ServiceandMaintenance ......................... Paces 14-17 Off-Season Storage.................................. Pace18 TroubleShooting .......................................
This machinewas built to be operatedaccordingto the safe operation practicesin this manual.As with any type of powerequipment, carelessnessor error on the part of the operatorcan resultin seriousinjury.This machineis capableof amputatingfingers,hands, toes and feet and throwingdebris. Failureto observethe following safetyinstructionscouldresultin seriousinjuryor death. This symbolpointsout importantsafetyinstructionswhich,if not followed,couldendangerthe personalsafetyand/orpropertyof yourselfand others.
Safe Handling of Gasoline: Toavoidpersonalinjuryor propertydamageuseextremecare in handlinggasoline.Gasolineis extremelyflammableand the vaporsare explosive.Seriouspersonalinjurycan occurwhengasolineis spilled on yourselfor yourclotheswhichcan ignite.Washyour skin and changeclothesimmediately. • • Use onlyan approvedgasolinecontainer. Neverfill containersinsidea vehicleor on a truckor trailerbed with a plasticliner.Alwaysplacecontainerson the groundaway fromyour vehiclebeforefilling.
• Maintainor replacesafetyand instructionlabels,as necessary. Followthis manualfor safe loading,unloading,transporting,and storageof this machine. Neverstorethe machineor fuel containerinsidewherethereis an open flame,spark or pilot lightsuch as a waterheater,furnace, clothesdryer,etc. Allowmachineto cool at least 5 minutesbeforestoring. • • • • Alwaysreferto the operator'smanualfor properinstructionson off-seasonstorage. If thefuel tank hasto be drained,do this outdoors.
SAFETY SYMBOLS This pagedepictsand describessafetysymbolsthat mayappear on this product. Read,understand,and followall instructionson the machine beforeattemptingto assembleand operate. i READ THE OPERATOR'S MANUAL(S) Read, understand, i and follow all instructions in the manual(s) before WARNING-- to assemble and ROTATING BLADES Keep hands out of inlet and discharge openings inside • attempting operate while machine is running.
TO AVOID SERIOUS iNJURY: TO AVOID SERIOUS iNJURY: Read the using • Do not operate unstable, on uneven ground where unit is Do not operate on pavement, other hard surfaces Keep all shields attached. gravel or • Keep Shredder combustible muffler, Chute materials away from hot engine and Wear approved before and guards and others away from area of safety glasses, starting in place from these injury may bounce protection. and and securely is running. openings Do not place chute.
f IMPORTANT:This unit isshippedwithoutgasolineor oil inthe engine. Be certain to serviceenginewithgasolineand oil as instructed in the Operationsectionof this manualbeforeoperatingyourmachine. NOTE:Referenceto rightand left hand sideof the ChipperShredder isobservedfrom the operatingposition. OPENING CARTON 1. Cut eachcornerof the cartonverticallyfromtop to bottom. 2. 3. Removeall looseparts. Removeloosepackingmaterial. REMOVING UNiT FROM CARTON 1.
ATTACHING THE CHUTE DEFLECTOR A. Removethe wingknobsfrom eachside of the lowerimpeller housing.SeeFigure3. . i B. Removethe hexlock nut, spacers,and hex boltfrom thetop of the impellerhousing. A. Align the chutedeflectorin positionon the dischargeopening and insert hexbolt with spacerthroughhingeon chute deflector(spacersfit insideof hinges). See Figure4. B. Placesecondspaceroverhex boltinsideotherhinge and securewith hex lock nut. C.
. A, Align the chipperchute overtheweld studs,so the slot in the bottomof the chuteis facing down.See Figure6. B. Securechipperchutewith thethreecuppedwashers(cupped sideagainstthe chipperchute)and hexnuts previously removed.Do nottightenthe nuts at this time. Thechippershredderwas shippedwith one end of the support bracealreadysecuredto the lowerframe.Loosenbutdo not / / / / / / / i / ,,/ / ,, / /' / ,/ removethebolts securingthe braceto theframe. A.
(large) Hopper Assembly Release Rod Gas Fill (small) Chipper Chute Tamper ===--_ Chute Deflector @ Figure9 Nowthat you haveset up your chippershredderfor operation,get aquaintedwith its controlsand features.Theseare describedbelow and illustratedon this page.This knowledgewillallowyou to useyour newequipmentto its fullestpotential. CHIPPER Theoperationof anychippershreddercan resultin foreignobjects beingthrown intothe eyes,which can damageyoureyes severely.
GAS AND OIL FILL-UP Alcoholblendedfuels (calledgasoholor usingethanolor methanol) can attractmoisturewhich leadsto separationand formationof acids duringstorage.Acidic gascan damagethe fuel systemof an engine whilein storage. Oil (one bottle shipped with unit) FirstTime Use 1. 2. Removeoil fill dipstick. Withthe chippershredderon levelground,usea funnelto empty entirecontentsof oil bottle providedintothe engine. 3. Replaceoil fill dipstickand tighten.
NOTE:A noisewill be heardwhenfindingthe startof the compression cycle.This noiseis causedby the flails and fingers,which are partof the shreddingmechanism,and it shouldbe expecteduntilthe impeller reachesfull speed. 7. Pull the ropewith a rapid,continuous,full armstroke.Keepa firm grip on the starterhandle.Letthe rope rewindslowly. 8. Repeat,if necessary,untilenginestarts.Whenenginestarts, movechokecontrolgraduallytowardthe RUNI Jt I position.. 9.
MAINTENANCE Followthe maintenanceschedulegivenbelow.This chart describes serviceguidelinesonly. Usethe ServiceLog columnto keeptrackof completedmaintenancetasks.To locatethe nearest Sears Service Centeror to scheduleservice,simplycontactSears at 1-800-4-MY-HOME®. Beforeperforminganytypeof maintenance/service, disengageall controlsand stoptheengine.Waituntilall movingpartshavecometo a completestop.Disconnectsparkplugwireandgrounditagainstthe enginetopreventunintendedstarting.
Servicing the Air Cleaner f Do notuse pressurizedair or solventsto cleanthe air cleaner cartridge. Theair cleanerpreventsdamagingdirt, dust,etc.,from enteringthe carburetorand beingforced intothe engineand is importantto engine life and performance.Neverrun the enginewithoutan air cleaner completelyassembled. 3over Replacetheair cleanerevery25 hoursof operation. 1. Loosenscrewsthat hold the air filter cover. 2. 3. Opencover and removeair filter.See Figure12. Discardold air filter. 4.
Service IVluffler f // / Temperatureof mufflerand nearbyareas mayexceed 150° F (65°C). Avoidthese areas. • Inspectmufflerevery 50 hours,and replaceif necessary. Replacementparts for themufflermustbe the sameand installed in the samepositionas theoriginal parts. Clean Engine Dailyor beforeevery use, cleangrass,chaffor accumulated debrisfromengine.Keeplinkage,spring,and controlsclean. Keeparea aroundand behindmufflerfreeof any combustible debris. • • Keepingenginecleanallows air movementaroundengine.
4, 5. 6, Removethechipperchute supportbracefrom the frameby removingthe hexbolts. Rotateimpeller assemblyby handuntil youlocateone of two chipperbladesin thechipperchuteopening. Removetheblade by removingthe internalhex screws,lock washers,and hex nutswhich secureit to the impeller.Retainthe hardware,See Figure15, NOTE:Use a 3/16" hexkey (Allen)wrenchon theoutside of the blade and a 1/2" box(or socket)wrenchon the insideof the impeller.
Neverstorechippershredderwith fuel in tank indoorsor in poorly ventilatedareaswherefuel fumesmay reachan openflame,spark, or pilot lightas on a furnace,water heater,clothesdryer,or gas appliance. PREPARING THE ENGINE PREPARING Forenginesstoredover30 days: 1. To preventgumfrom formingin fuel systemor on carburetor parts, run engineuntilit stopsfrom lackof fuelor add a gasoline additiveto the gas in the tank.
Beforeperforminganytypeof maintenance/service, disengageall controlsand stoptheengine.Waituntilall movingpartshavecometo a completestop.Disconnectsparkplugwireandgrounditagainstthe engineto preventunintendedstarting.Alwayswearsafetyglassesduring operationor whileperforminganyadjustments or repairs. Enginefails to start 1. Throttlelevernot in correctstartingposition 1. Movethrottleleverto START/RUNposition. 2. 3. 4. Chokenot in the CHOKEposition Sparkplugwire disconnected Faultyspark plug 2. 3. 4.
Craftsman Chipper Shredder -- Model No. 247.77638 / / ;/ / / _ ; 2O ....
Craftsman Chipper Shredder B IViodel No. 247.77638 710-3008 Hex CapScrew5/16-18x .75 23. 736-0247 Fiat Washer3/8 x 1.25 Wing Knob5/16-18 24. 942-0571 ShredderBlade 681-0094-0721 ChuteDeflectorAssembly 25. 710-1254 Hex CapScrew3/8-24x 2.25 5. 911-0835 ClevisPin 26. 681-0004A-0721 OuterImpellerHousingAssembly 6. 781-0457-0637 ShredderScreen 27. 710-0825 Hex CapScrew 1/4-20x 3.75 7. 926-0211 U-Nut5/16-18 28. 781-0515-0637 FrontSupportBracket 8. 950-0793 Spacer 29.
Craftsman Chipper Shredder B IViodel No. 247.
Craftsman Chipper Shredder B IViodel No. 247.77638 936-0170 Bell Washer5/16 x 1.0 16 950-0786 Spacer ChuteFlap 17 738-0813 AxleAssembly ChuteFlapStrip 18 737-0298 Pipe,Oil Drain 681-0068A-0637 ChipperChuteAssembly 19 634-04009 WheelComplete,10.0x 4.0 Gray 6 710-0751 HexCap Screw1/4 -20 x.620 20 726-0214 PushCap 7 712-04064 Hex LockNut 1/4-20 21 681-0183B-0721 Frame 8 710-0106 HexCap Screw1/4-20x 1.25 22 936-0451 Washer,.320IDx.93 OD 9 736-0173 FlatWasher.28 ID x .
Craftsman Engine Model 204312=0529 For Chipper Shredder Model No. 247.77638 110_8OPERATORSMA,0A'] I 48S,OmB.OOK I I 1329_EP.AOEMENTENG,NEI I 13_9_E_A'_A"0A' ] 529 _, 396 397 12 5o5 _ 615 _) 24_j 616 'Y 718 __b J ....
Craftsman Engine IViodel 204312-0529 For Chipper Shredder IViodel No. 247.
Craftsman Engine IViodel 204312-0529 For Chipper Shredder IViodel No. 247.77638 121 CARBURETOR OVERHAUL KiT 127 0 633 3 C:-._ 163 118 _@ 130 51A( 127 ° 95@ 633 117@ 53 51A( 369 i_ 105 0 137 _%_.. I \ _ 967 445 161I'i _'_s 1127 _ 957 _,.
Craftsman Engine IViodel 204312=0529 For Chipper Shredder IViodel No. 247.77638 363 37 78 _ 306 1005 1070 332 334 774 635 356 356A ...........
Craftsman Engine IViodel 204312=0529 D = For Chipper Shredder IViodel No. 247.77638 D = O O I CylinderAssembly 51 6948740.+ Gasket-Intake Kit-Bushing/Seal(MagnetoSide) 51A 6948750.+ Gasket-Intake 391086s. Seal-Oil(MagnetoSide) 53 794830 Stud (Carburetor) 5 794870 Head-Cylinder 55 695288 Housing-RewindStarter 7 694872.+ Gasket-CylinderHead 58 693389 Rope-Starter 11 696796 Tube-Breather 59 805957 Insert-Grip 12 694953.
Craftsman Engine IViodel 204312=0529 D = For Chipper I! Shredder IViodel No. 247.
Craftsman Engine IViodel 204312=0529 For Chipper Shredder I = O O 851 692424 Terminal-SparkPlug 868 690968.+ Seal-Valve 883 794818. Gasket-Exhaust 914 794827 Screw(RockerCover) 951 699961 Lever-Choke 957 792647 Cap-FuelTank 967 491435s Filter-PreCleaner 968 794785 Cover-AirCleaner 972 694260 Tank-Fuel 975 696138 Bowl-Float 998 696683 Pipe-Oil 1005 794815 Fan-Flywheel 1022 690971.
Craftsman Chipper Shredder Model No. 247.77638 777333113 777333200 ®ROTATING CUTTING BLADES. KEEP HANDS AND FEET OUT OF OPENING WHILE MACHINE mS RUNNING. =DO NOT CHUTE OPERATE THiS MACHINE UNLESS THE DEFLECTOR HAS BEEN PROPERLY iNSTALLED ANDJS SECURED WiTH THE Operatien Sparks Of This That Vegetation. Required. Equipment Can Start A The Spark HAND ionsTo Fires May Fire Prevention May Should For Laws Create Around Arrestor Operator Local Fire Agencies KNOBS.
(Thispage applicablein the U.S.A.and Canadaonly.) Sears, Roebuck and Co., U.S.A. (Sears), the California Air Resources Board (CARD) and the United States Environmental Protection Agency (U.S.
Look For Relevant Emissions Durability Period and Air index information On Your Engine Emissions Label Engines that are certified to meet the California Air Resources Board (CARB) Tier 2 Emission Standards must display information regarding the Emissions Durability Period and the Air Index. Sears, Roebuck and Co., U.S.A. makes this information available to the consumer on our emission labels.
Congratulations onmaking asmart purchase. Your newCraftsman® Once youpurchasethe Agreement,a simplephonecall isall that it product isdesigned andmanufactured foryears ofdependable opera- takesfor youto scheduleservice.Youcan call anytimedayor night, or tion.Butlikeallproducts, itmayrequire repair fromtimetotime. That's schedulea serviceappointmentonline. when having aRepair Protection Agreement cansave youmoney and The RepairProtectionAgreementisa risk-freepurchase.If you cancel aggravation.
Declaraci6n de garant[a ....................... Pagina 35 Practicas operaci6n seguras ............... Paginas 36-39 Montaje ................................................ Paginas 40-43 Operaci6n ............................................ Paginas 44-45 Servicio y Mantenimiento .................... Paginas 46-49 Almacenamiento fuera de temporada .... Pagina 50 Soluci6n de problemas ...................... Pagina 51-52 Etiquetas de seguridad ....................... Pagina 7 Lista de piezas ................
Esta rn_.quinarueconstruidapara seroperadade acuerdocon las reglasde seguridadcontenidasen este manual.AI igualque con cualquiertipo de equipornotorizado,un descuidoo error por partedel operadorpuede producirlesionesgraves.Estarn_.quina es capazde arnputarrnanosy piesy de arrojarobjetoscon gran fuerza.De no respetarlas instruccionesde seguridadsiguientesse puedenproducirlesionesgraveso la rnuerte.
Manejoseguro de la gasolina Paraevitar lesionespersonaleso daSosrnaterialessea surnarnente cuidadosoal rnanipularla gasolina.La gasolinaes altarnenteinflarno able y sus vaporespuedencausarexplosiones.Se puedelesionar gravernentesi derrarnagasolinasobreustedo sobrela ropaya que se puedeencender.L_vesela piel y c&rnbiesede ropa de inrnediato. • • • • • • Utilices61orecipientesparagasolinaautorizados.
MANTENIMIENTO Y ALMACENAMIENTO • Nuncarnanipulelos dispositivosde seguridadde rnanera irnprudente.Controleperi6dicarnenteque funcionende forrna adecuada. • Controlefrecuenternenteque todos lospernosy tornillosest_n bien ajustadosparacornprobarque la rn_.quinase encuentraen condicionessegurasde funcionarniento.Adern_.s,realiceuna inspecci6nvisualde la rn_.quinapara controlarsi la rnisrnaest,. da_aday rep_.relade ser necesario.
SilVIBOLOS DE SEGURIDAD Esta p&ginarepresentay describela seguridadlos simbolosque puedenpareceren este producto.Lea,comprenda,y sigatodas instrucciones en la m_quinaantesprocurarpara reuniry operar. LEA EL MANUAL(S) Lea, comprenda, DEL OPERADOR y siga todas instrucciones en el manual (manuales) antes procurar para reunir y operar ADVERTENClA-Mantenga GIRANDO HOJAS manos fuera de aperturas de cala y descarga mientras m_iquina corre.
IMPORTANTE:Esta unidadse entregasin gasolinao aceiteen el motor.AsegQresede servMo con motorde gasolinay aceitesegQn las instrucdonesen la operad6nde este manualantesde operarsu rn_.quina. NOTA: Referenciaa la derechay la izquierdade la TrituradoraChipper se observadesdela posici6nde funcionarniento. APERTURA 1. 2. 3. DE LA CAJA DE CARTON Cortecada una de lasesquinasde la cajaverticalrnente,de la partesuperiora la base. Saquetodas laspiezas sueltas. Quiteel materialde empaquesuelto. COIVIO SACAR 1. 2.
COLOCACl6N DEL CANAL DEFLECTOR r' A. Saquelas perillasa mariposade los costadosde la caja inferiordel motor. . B. Saquela tuercade seguridadhexagonal,los separadoresy el bul6n hexagonalde la parte superiorde la cajadel motor.Vea la Figura313. A. Pongaen Ifneael canal deflectoren su posici6nen la abertura de descargae inserteel bul6n hexagonalconel separadora travesde la bisagradel canaldeflector(los separadoresvan dentrode las bisagras).Vea la Figura314. B.
2, , f A, Pongaen Ifneael canalde la cortadorapor encimade los esp_.rragos de la soldadurade maneraque la ranuraen la basedel canalmirehaciaabajo, B. Ajusteel canal de la cortadoracon tres arandelascurvas (conel lado curvocontrael canalde la cortadora)y con las tuercashexagonalesque habfasacadoanteriormente,No ajustelas tuercasen este momento.Vea la Figura6. La cortadoratrituradorafueenviadacon un extremode la / i 7 / / / / / / / / / / J / / / B.
Montaje de la tolva Varilla de liberaci6n Llenado de aceite Llenado de combustible Canal de cortadora Pis6n Deflector del canal Figura9 CANAL DE LA CORTADORA Permiteque las ramaspeque_asde hasta3" de di_.metroingresenal motorpara ser picadas.Veala Figura9. MONTAJE AI operaruna cortadoratrituradorapuedeserque objetosextra_os DE LA TOLVA Permitaque lashojasy las ramaspeque_asde hasta 1/2 de di_metro ingresenal motorpara serpicadasy trituradas.
LLENADO DE GASOLINA Y ACEITE 3. Aceite (se env(a una botella junto con la unidad) Primeruso 1. 2. Saquela varilladel nivelde aceite. Con la cortadoratrituradoraal niveldel suelo,utiliceun embudo paravaciar dentrodel motortodoel contenidode la botellade aceitesuministradacon la unidad. 3. Vuelvaa colocarla varillade Ilenadode aceite y ajQstela. Lleneel tanquede combustibles61ocongasolinanormalsin plomo, limpiay fresca.No usegasolinaque contengaMETANOL.
3. 4. 5. 6. Gire la v_.lvulade cierrede combustiblea la posici6nEN. Muevael control del obturadorhaciael controldel regulador!'o,I para obturarel carburadordel motor.(Si el motorest,. tibio la obturaci6npuedeno sernecesaria). Muevala palancade controldel estranguladora la posici6n ,_ START/RUN(encendido/ funcionarniento,representadopor una liebre).Veala figura 10. Situadodetr&sde la unidad,tome la rnanijadel arrancadory tire de la cuerdahastaque sienta un tir6n. Nosobrecarguela tolva.
LISTA DE iVlANTENIIVllENTO Antes de realizarcualquiertipo del rnantenirniento/servicio, suelte todos los rnandosy pare el motor.Esperehasta quetodas las partes de rnovirnientohayanvenidoa una paradacornpleta.Desconecteel alarnbrede bujia y b_.selocontrael motorpara prevenirel cornienzo involuntario. SiernpreIlevepuestoscristalesinastillables durantela operaci6no realizandocualquierajuste o reparaciones. CadaUso 1. Niveldel aceitede motor 2. Hardwaresueltooausente 1. 2.
Servicio Del Filtro De Aire f Nouse ake presurizadoo solventespara limpiarel cartuchode filtro de aire, El filtro de aire evitael ingresoal carburadorde suciedad,polvo,etc, perjudicialesy evitaque losmismosseanintroducidosdentrodel motor.Adem_.s,dichofiltro es importantepara la vida Qtily el rendimiento del motor.Noponga nuncaen funcionamientoel motorsin haber montadototalmenteel filtrode ake. Filtrode aire La )a Sustituyenel filtro de airecada 25 horasde la operaci6n. 1.
f Limpieza Del Motor • Diariarnenteo antes de cada uso, lirnpiehierba,barciao escornbrosacurnuladosdel motor.Guardeencadenarniento, prirnavera,y rnandoslirnpios.Guardeel &reaalrededory detr&s del silenciadorsin cualesquieraescornbroscombustibles. / / / i • El cuidadodel motor lirnpioperrniteel rnovirnientoa_reoairededor del motor. • Las partesde motordeberfanserguardadaslirnpiaspara reducir el riesgode recalentarsey la ignici6nde escornbrosacurnulados.
NOTA:Use una Ilavehexagonalde 3/16" (Allen)en el exteriorde la cuchillay una Ilavede tubode 1/2" (o cubo) en el interiordel motor. Sostengala IlaveAllenfirrnernentey gire la Ilavede tubo (o cubo)para aflojarla tuerca. 7. Coloqueunacuchillade repuesto(NQrnerode pieza742-0544) con loselernentosde ferreteriaque extrajoanteriorrnenteo af[lela. IMPORTANTE:Cuandoafilala cuchilla,prot_jaselas rnanosutilizando guantes.Sigael _.ngulooriginalde afiladoy asegQresede extraeruna cantidadigualde cadacuchilla. / / 8.
Nuncaalrnacenecortadoratrituradoracon el combustibleen el tanquedentroo en _.reasrnalventiladasdonde los vaporesde combustiblepuedenalcanzaruna llamaabierta,la chispa,o el pilotocornoen un homo,calentadorde agua, secadorde ropa,o aplicaci6nde gas. PREPARACI6N DEL MOTOR Ya que los rnotoresalrnacenaronrn_.sde 30 dfas: 1.
hayanvenidoa una paradacornpleta.Desconecteel alarnbrede bujfay b_.selocontrael motorpara prevenirel cornienzoinvolunSiernpreIlevepuestoscristabs inastillablesdurantela operaci6no realizandocualquierajusteo reparaciones. El motorno arranca 1. La palancadel reguladorno est,. en la posici6nde arranquecorrecta La palancade obturaci6nno est,. en la posici6nON(encendido) 1. 3. 4. 5. Se ha desconectadoel cablede la bujia La bujia no funcionacorrectarnente El tanquede cornbustibbest,.
tuier tipodel rnantenirniento/servicio, sueltetodos los rnandosy pareel motor.Esperehastaque todas laspartes de yan venidoa una paradacornpleta.Desconecteel alarnbrede bujfay b_.selocontrael motorpara prevenirel cornienzoinvolunSiernpreIlevepuestoscristalesinastillablesdurantela operaci6no realizandocualquierajusteo reparaciones. El motorrecalienta 1. 2. El nivelde aceitedel motores bajo Flujodeairerestringido 1. Lleneel c_.rtercon la adecuadaselecci6nde aceite. 2.
(Esta p_.ginase aplica s61oen EE.UU. y Canada.). Sears, Roebuck and Co., U.S.A.
Busque el periodo de duraci6n de emisiones importantes yla informaci6n la etiqueta de emisiones de su motor de clasificaci6n de aire en Los motores cuyo cumpiimiento con los estAndares de emisi6n Tier 2 de la Comisi6n de Recursos Ambientales de California (CARB) est6 certificado deben exhibir la informaci6n relacionada con el perJodo de duraci6n de las emisiones y la clasificaci6n de aire. Sears, Roebuck and Co.
Felicitacionespor haberrealizadouna adquisici6ninteligente.El productoCraftsman@que ha adquiridoest_ dise_adoy fabricado para brindarrnuchosa_osde funcionarnientoconfiable.Perocorno todoslos productosa vecespuederequerirde reparaciones.Esen esernornentocuandoel disponerde un Acuerdode protecci6npara reparacionesle puedeahorrardineroy problernas.
Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.