Specifications

12 Crafted with CRAFTSMAN MARINE

Settings

II – Background lighting

There are 2 possibilities for dimming the brightness of the background lighting:

1. by using an own type of dimmer of the potentiometer type

2. by using the automatic dimmer module by Craftsman Marine.

A. Potentiometer:

1. Position the battery main switch in the ‘OFF’ position

2. Remove the plug (A) ; see picture below

3. Cut the wire loop

4. Position the dimmer (B) between the two wire ends

5. Put the plug with the dimmer (A) back into the printed circuit board (position J6)

3. 4.