Specifications

22 Crafted with CRAFTSMAN MARINE

Alternative possibilities

Replace engine control/instrument panel of a CM4.33 or CM4.42 engine

II a - CM4.33 / CM4.42 with an ALFA20E panel + temperature gauge

Following must be done to connect an ALFA20E panel to the engine models CM4.33

and CM4.42:

1. Remove the plug from the thermostat housing (see adjoining picture)

2. Fit instead the temperature sensor type DB.020.20003

3. The wiring features two plugs: one for the temperature switch (already fitted) and

the other one for the temperature sensor. Connect this plug to the temperature

sensor.

4. Fit the temperature gauge, as per description on page 23.

II b - CM4.33 / CM4.42 with an ALFA30E orALFA40E control/instru-

ment panel

Following must be done to connect an ALFA30E or ALFA40E panel to the engine

models CM4.33 and CM4.42:

1. Follow the steps 1 to 3, described here above

2. Remove the oil pressure switch (see adjoining picture)

3. Fit instead the adapter and the oil pressure switch/sensor type DB.020.20001

4. Remove the ALFA20E panel

5. Fit instead the ALFA30E or ALFA40E panel