Specifications

23Crafted with CRAFTSMAN MARINE
Temperature gauge
Red
Black
Violet
Black
Brown
Alternative possibilities
Following must be done to replace the voltmeter in the ALFA20E panel by a
temperature gauge. If so required, the temperature gauge may also be positioned
next to the panel.
1. Remove the connecting plugs from the voltmeter.
2. Remove the voltmeter by loosening the bracket (see picture A.)
3. Remove the finishing ring from the temperature meter, by turning it anti-clockwise
(see picture B). Make sure that the glass will stay in place.
4. Fit the temperature gauge and fix it with the bracket
5. Fit the plug of the background lighting.
6. Fit the plug of the temperature gauge (brown wire, to the rear of the wiring), see
picture C.
A.
C.
B.
Extension of the ALFA20E panel with a temperature gauge
Red
Voilet Brown
Temperature gauge
Black
Black
8