Operator's Manual LITHIUlVi=ION CORDLESS 1/2-in. Drill/Driver Model No. 320.26302 320.29032 320.29036 ,WARRANTY ,SAFETY • ASSEMBLY = DESCRIPTION =OPERATION =MAINTENANCE ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. CHARGE BATTERY BEFORE FIRST USE Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.
[] Warranty ...................................................................................................................................... 2 [] Introduction 2 [] Safety Symbols ........................................................................................................................ 3-4 [] General Safety Rules ............................................................................................................... 5-7 [] Specific Safety Rules ........................
Thepurpose ofsafety symbols istoattract yourattention topossible dangers. Thesafety symbols andtheexplanations withthemdeserve yourcareful attention andunderstanding. The symbol warnings DONOT bythemselves eliminate anydanger. Theinstructions andwarnings theygivearenosubstitutes forproper accident prevention measures. _'t_WABN|NG: BE SURE to read and understand all safety alert symbols such as i "DANGER", "WARNING" and "CAUTION" BEFORE using this product.
Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DES|G NAT|ON/EXPLANAT|ON V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Alternating Time Current Type of current Direct Current no ] ...
_,WARN|HG; HEAD AND UNDEHSTAND ALL INSTHUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to mains-operated (corded) power tools or battery-operated (cordless) power tools. SAVE THESE iNSTRUCTiONS WORK AREA SAFETY II Keep work area clean and well lit. Cluttered or dark areas invite accidents.
mDress properly. gloves parts. away from Do not wear loose clothing or jewelry. Keep your hair, clothing and moving parts. Loose clothes, jewelry or long hair can be caught in moving m if devices are provided for the connection ensure these are connected and properly related hazards. m Do not wear loose clothing or jewelry. hair can be drawn into air vents. of dust extraction and collection facilities, used. Use of these devices can reduce dust- Contain long hair.
SERVICE m Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. m When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. m Use auxiliary handle supplied can cause personal injury.
,_,WARN|NG: READ AND UNDERSTAND ALL iNSTRUCTiONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. | 1 ill Before using battery Charger/Adapter, read all instructions and cautionary markings in this manual, on battery Charger/Adapter, battery and product using battery to prevent misuse of the products and possible injury or damage. _kCAUTION.
[] Disconnect ChargerlAdapter from the power supply when not in use. This will reduce the risk of electric shock or damage to the Charger/Adapter if metal items should fall into the opening. It will also help prevent damage to the Charger/Adapter during a power surge. [] Risk of electric battery terminal. shock. Do not touch uninsulated portion of output connector or uninsulated [] Save these instructions. Refer to them frequently and use them to instruct others who may use this tool.
Fig, I Two-Speed Gear Box Vents Auxillar Handle(available only in 320.28302) Torque Adjustment Ring Direction of Rotation Selector Chuck Jaws (FORWARD/CENTER Ratcheting LOCK/REVERSE) Keyless Chuck Trigger Switch Integrated LED Worklight _mD _ _ • • _ _ Chuck 1/2-in. Ratcheting, single-sleeve Motor 20 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed LO 0-350 / HI 0-1,300 (RPM) Clutch 24 Position Torque 500 in. Ibs. Drill/Driver Weight (without battery) 3.88 Ibs.
_OD _ * • • w °0 ¸ Chuck 1/2-in. Ratcheting, single-sleeve Motor 12.0 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed LO 0-230 / HI 0-1,000 (RPM) Clutch 24 Position Torque 370 in. Ibs. Drill/Driver Weight (without battery) 3.07 Ibs. Battery Type Lithium-Ion Battery Voltage 12.0 Volt DC Charger/Adapter Input 120-Volts, 60 Hz AC only Optimum Charging Temperature 32°F (0 ° C) -104°F (40°C) Chuck 1/2-in. Ratcheting, single-sleeve Motor 16.
KNOW YOUR DRILL/DRIVER (Fig. 1) the tool and in this operator's manual as well as a knowledge of the project you are attempting. _,WARN|NG:Thesafeuseofthisproductrequiresanunderstandingoftheinformationon Before use of this product, familiarize yourself with all operating features and safety rules. ADJUSTABLE TORQUE The drill has a 24-position clutch. The torque adjustment amount of torque for your application.
POWER BAR mThisLithium-Ion battery pack isequipped with a POWER BAR which is used to display the battery pack's remaining run time. Press the POWER BAR button to display the LED lights. The LED lights will stay lit for approximately 4 seconds.
NOTE: A significantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced. COLD WEATHER 3 | J OPERATION I!1 This Lithium-Ion battery pack will provide optimal performance in temperatures between 32°F (0°C) and 104°F (40°C). When the battery pack is very cold, it may "pulse" for the first minute of use to warm itself up. Put the battery pack on a tool and use the tool in a light application.
LED FUNCTIONS OF CHARGER/ADAPTER (Fig. 4) Fig, 4 LED iNDiCATOR _) (SEE Hi/LO NANUAL) TENP.
TOATTACH BATTERY PACK (Fig.5) mLock thetrigger switch onthedrillbyplacing thedirection ofrotation (forward/reverse/ center lock)selector incenter position mAligntheraised portion onthebattery pack withthegrooves onthebottom ofthedrill, thenattach thebattery pack tothedrillas shown mMake sure thelatch onthebattery pack snaps intoplace andthebattery pack issecured tothedrillbefore beginning operation. TODETACH BATTERY PACK (Fig.
TRIGGER SWITCH (Fig. 6) To turn the drill ON, depress the switch trigger. To turn it OFF, release the trigger. VARIABLE Direction of rotation selector SPEED (Fig. 6) The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK) (Fig. 6) The direction of bit rotation is reversible and is controlled by a selector located above the trigger switch.
TWO-SPEED GEAR BOX (Fig.8) Thedrillhasatwo-speed gearboxdesigned fordrilling ordriving atLOorHIspeeds. A slideswitch islocated onthetopofthedrillto select either LO or HI speed. When using drill Fig, 8 Two-speed gearbox switch Hi in the LO speed range, speed will decrease and the drill will have more power and torque. When using drill in the HI speed range, speed will increase and the drill will have less power and torque.
LED WORKLIGHT (Fig. 11) The LED worklight located on the base of the drill will come on when the trigger switch is depressed. The LED worklight will turn off when the trigger switch is released. This provides additional lighting on the surface of the workpiece for operation in lower-light areas. Variable BiT STORAGE (Fig. 12) When not is use, the bit provided with the drill can be stored on the base of the drill by snapping it into place in the bit clip. LED worklight Fig. t2 INSTALLING BITS (Fig.
USING THE AUXiLiARY HANDLE ASSEMBLY (ONLY AVAILABLE iN 320.26302 )(Fig. 15) An auxiliary handle assembly is packed with the drill for ease of operation and to help prevent loss of control. The handle can be rotated 360 ° and it can also be mounted on the opposite side for left hand use. m Loosen the handle assembly handle counterclockwise. m Rotate the handle assembly operating position. To tighten by turning the to the desired m Securely tighten by turning the handle assembly clockwise.
WOOD DRILLING Formaximum performance, usehighspeed steelorbradpoint bitsforwood drilling. mBegin drilling ataverylowspeed toprevent thebitfromslipping offthestarting point, increase speed asthedrillbitbitesintothematerial. mWhen drilling "through" holes, place ablock ofwood behind theworkpiece toprevent ragged orsplintered edges ontheback sideofthehole. METAL DRILLING For maximum performance, use high speed steel bits for metal or steel drilling.
GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. _WARN|NG: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
CHUCK REMOVAL (Fig.17-19) Thechuck canberemoved andreplace bya new one. mLock thetrigger switch byplacing the direction ofrotation selector incenter position. ! Open thechuck jaws. mInsert a5/16-in. orlarger hexkeyintothe chuck ofthedrillandtighten thechuck jaws securely. mTapthehexkeysharply withamallet in aclockwise direction. Thiswillloosen the screw inthechuck foreasyremoval. mOpen thechuck jawsandremove thehex key. Using ascrewdriver, remove thechuck screw byturning itinaclockwise direction.
@ / @ © 20 Volt. LITHIUMqON CORDLESS 1/2-in. DRILL / DRIVER MODEL NUMBER 320.
20 Volt. MTHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM NO. PARTS NO. PART DESCRIPTION QTY. 1 5820325000 Screw (L.H.) 1 2 3860084000 Chuck 1 3 3420466000 Decorate Cover 1 4 3320358000 Clutch Cap 1 5 5810032000 Tapping Screw 4 8 2790110000 Gear Case ASSY.
20 Volt. LITHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.26302 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool.
mL _rm _jc o_J_J r_ rm
12 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool.
12 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29032 The Model Number will be found on the Nameplate attached to the right side o1the drill. Always mention the Model Number in all correspondence regarding your tool.
mL Oi_ o_ c r- €_ €_
16 Volt. LITHIUM-ION CORDLESS 1/2-in. DRILL/DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool. ITEM NO. PARTS NO. 1 3810357000 2 2822394000 PART DESCRIPTION SCREW BIT MOTOR&GEAR QTY.
16 Volt. LITHIUM=ION CORDLESS 1/2=in. DRILL/DRIVER MODEL NUMBER 320.29036 The Model Number will be found on the Nameplate attached to the right side of the drill. Always mention the Model Number in all correspondence regarding your tool.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! iiiiiiiiiiiiiiii For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. iiiiiiiiiiiiiiii For Sears professional installation of home appliances and items like garage door openers and water heaters. iiiiiiiiiiiiiiii 1-800-4-MY-HOME ® Anytime, day or night /1-_00-469-_63t _USA ondOonada_ www.
