Utility Vehicle User Manual

4. Replace the bag on to the mower. Hook the loose

end of the bag retainer straps to the vehicle frame

to secure the grass bag.

Using as Mulcher

This vehicle is shipped with a mulch plug to recirculate

grass clippings into the lawn. The ultra-fine clippings

are forced back into the lawn where they act as a

natural fertilizer. Observe the following for best results:

• Attach the mulch plug to the cutting deck following

instructions on page 7.

• Never attempt to mulch if the lawn is damp. Wet

grass tends to stick to the undemide of the cutting

deck preventing proper mulching of the clippings.

• Do notattempt to mulch more than 1/3 the total

height of the grass orapproximately 1-1/2 inches,

• Maintain a slow ground speed to allow the grass

clippings more time to be effectively mulched.

Using as Utility Cart

The lawn utilityvehicle, as its name suggests, can be

used as both a ridinglawn mower and a utilitycart.

Remove grass catcher to expose the utilitybed.

See Figure 9, Follow instructions on page 7 for

grass catcher removal. Exemise caution in ddving

the vehicle when hauling things on its utilitybed.

NOTE: Total load capacity, including operator, should

not exceed 400 Ibs.

Figure 9