Owner`s manual

BeltTensionRod
(Disengaged
P_ition) _,_7
#
R.H. Mandrel
Cover
Electric
, Crutch
Pultey
Idler
Pulleys
Spring Arm
R.H.
Mandrel
R.H. Suspension Arm
Primary Idler Arm
TO REPLACE MOWER BLADE DRIVE
BELT
Park the tractoron level surface. Engage
parking brake.
1. Remove mower ddve belt (See "TO
REPLACE MOWER DRIVE BELT" in
this section of this manual).
2. Remove mower (Sou =TO REMOVE
MOWER" inthis sectionof this
manual).
3. Remove screws from L.H. mandrel
cover and remove cover.
4. Carefully roll belt off L.H. mandrel
pulley.
5. Remove belt from center mandrel
pulley, idler pulley, and R.H. mandrel
pulley.
6. Remove any dirt or grass which may
have accumulated around mandrels
7. Check secondary idler arm and idler
pulley to see that they rotate freely.
8. Be sure spring is hooked in secondary
idler arm and secondary spdng arm.
9. Install new belt in lower groove of R,H.
mandrel pulley, idler pulley, and
center mandrel pulley as shown,
10.Carefully roll belt over L.H. mandrel
pulley. Make sure belt is in all
grooves propedy.
11.Reinstall L.H. mandrel cover.
12.Reinstall mower to tractor (See
=INSTALL MOWER AND DRIVE
BELT" in the Assembly sectionof this
manual).
13. Reassemble mower ddve belt (See
=TO REPLACE MOWER DRIVE BELT"
in this section of this manual).
and entire upper deck surface.
Secondary _/_lry S_ing
IdlerArm_ / / Secondary
Mandrel
Arm
Center
Mandrel
R,B.
Mandrel
27