Use And Care Manual

1
Ball bearing slides
* Product you purchased may vary from picture shown
USER MANUAL
F2139 REV B
© 2018, Craftsman, 701 E. Joppa Road, Towson, MD 21286
• For casters, apply a bearing grease once a year.
• Lubricate the slides with grease or equivalent twice a year.
• Lubricate lock with graphite once a year.
• Periodically, the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Autowaxwillpreservetheunit’slusternish.Applythewaxfol-
lowing the instructions provided by the wax manufacturer. The
wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
uids.Forsafety,useanonammablecleaninguid.
• Itisrecommendedthatdrawerlinersbeusedtoprotectthen-
ish inside the drawers and to make the drawers easier to clean.
The drawer liners may be cleaned with soap and water.
MAINTENANCE
CAPACITIES
• The maximum weight for each drawer should be no more than
100 lbs.
• The maximum static load rating, including contents, should be
no more than 650 lbs. for cabinets with 4.5 x 1.5 inch casters.
DIRECT ALL INQUIRIES TO CRAFTSMAN CUSTOMER
SERVICE AT 888-331-4569. Outside the United States call your
local distributor. Please provide the Model Number when calling.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
SERVICE PARTS
WARNING: To reduce the risk of
injury, user must read instructions before using
product.