Owner's Manual CORDLESS SCREWDRIVER Two Speed / Reversible Model No. 315.111640 Save this manual for future reference CAUTION: Readand follow all Safety Rules and Operating Instructionsbefore first use of this product. • Safety • Features • Operation • Maintenance • Parts List Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co,, Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.
• Table Of Contents .......................................................................................................................................... • " _QQ_Ih'Ty'_.::.T..._.,.".:.;::.: ...................................................................................................................................... I!._.JIr_.(:lucti01 _ and ProductSpecifications.........................................................................................................
Thepurpose ofsafetysymbols istoattractyourattention topossible dangers. Thesafetysymbols, and theexplanations withthem,deserve yourcarefulattention andunderstanding. Thesafetywarnings do notbythemselves eliminate anydanger. Theinstructions orwarnings theygivearenotsubstitutes for properaccident prevention measures. SYMBOL A MEANING SAFETY ALERTSYMBOL: Indi_teswamingorcaution.Maybeusedinconjunctionwithothersymbelsorpict_mphs.
RULES FOR SAFE OPERATION (Continued) m NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal spark4ngof the motor could ignite flammable liquids, gases, or fumes. DO NOT PLACE BA'I'FERY TOOLS OR THEIR BA't'rERIES NEAR FIRE OR HEAT. They may explode. KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based productsor any strong solvents to clean your tool. DO NOT CHARGE BA'I'rERY TOOL IN A DAMP OR WET LOCATION.
RULESFORSAFEOPERATION (Continued) Anextension cord should not be used unless Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extensioncord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b.
Thefollowing recommended accessories arecurrently available atSearsRetailStores. • 5-Pc. Hex Shank Drill Bit Set • 6-Pc. Extra Length Screwdriver Bit Set • Speed Lock 1/4 in. Hex Accessories _1, WARNING: The use of attachments or accessories not listed might be hazardous. KNOW YOUR SCREWDRIVER See Figure I. WRIST STRAP See Figure 1. Before attemptingto use any tool familiarize yourself with all operating features and safety requirements.
,_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. _1= WARNING: Do not allow familiarity with your screwdriver to make you careless. Remember that a careless fraction of a second is sufficient to inflictsevere injury. Connect charger to screwdriver by inserting charger plug into inputjack.
SWITCH SWITCH LOCK See Figure 4. The switch triggercan be locked in the OFF position. This feature can be used to prevent the possibilityof accidental startingwhen not in use. To lock switch trigger, place the forward/reverse switch in center position. See Figure 2. To turn your screwdriver ON, depress switch trigger in the direction of the arrow in figure 2. To turn it OFF, release the switch trigger. FORWARD (F) REVERSE (R) SWITCH REVERSE (R) TRIGGER Fig, 2 TWO SPEED SWITCH See Figure 3.
BITSTORAGE • See Figure 5, Yourscrewdriver has a bit storage located under the motor, It is convenient for storing bits when not in use. Two bits are included with your screwdriver. BR STORAGE AREA Lock speed lock. To lock: grasp center of speed lock and pull in the direction of the arrow as shown in the lower view of figure 6. • When finished usingyourscrewdnver,unlockspeed lock,remove bitfrom colletand place it in bit storage. See Figure5.
WARNING: When servicing, useonlyidentical Craftsman replacement parts.Useofanyother partmay create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. _1, WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plasticparts.
® To preserve naturalresources,please recycleor disposeof properly. This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickelcadmium batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. BATTERY REMOVAL, RECYCLING See Figum & TO REMOVE: PREPARATION FOR • Lock switch trigger by placing the forward/reverse switch in center position. See Figure 4.
For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME Para pedir servicio de reparacibn s" (1-800-469-4663) a domicilio- In Canada for all your service and parts needs call Au Canada pour tout le service ou les pibces For the repair or replacement 1-600-676-5811 - 1-800-665-4455 parts you need: Call 6 am - 11 pm CST, 7 days a week PartsDirect SM 1-800-366-PART Para ordenar (1-800-366-7278) piezas con entrega a domicilio - 1-600-659-7084 For the location of