PERATOR'S MANUAL T ® 1/4 SHEET SANDER DOUBLE iNSULATED Model No. 315.111770 ,A WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Craftsman Consumer Helpline: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Visit the Craftsman web page: www.sears.
• Warranty .......................................................................................................................................................................... 2 • Introduction ..................................................................................................................................................................... 2 • General Safety Rules ...................................................................................................................
A WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or batteryoperated (cordless) power tool. SAVE THESE INSTRUCTIONS WORK SAFETY AREA [] Keep work area clean and well lit. Cluttered or dark areas invite accidents.
SERVICE [] _ Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. WARNING! To reduce the risk of injury, user must read instruction manual.
Someofthefollowingsymbolsmaybeusedonthis product.Pleasestudythemandlearntheirmeaning.Proper interpretation ofthesesymbolswillallowyouto operatethe productbetterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current mz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic no No Load Speed Rotational speed, at no load [] Class II Construction Double-insulated ...
Thefollowingsignalwordsandmeanings areintendedto explainthe levelsof riskassociatedwiththis product. SYMBOL _lk SIGNAL MEANING DANGER: Indicates imminently in death oranserious injury.hazardous situation, which, if not avoided, will result WARNING: Indicates potentially hazardous situation, which, if not avoided, could result in death ora serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded. A WARNING: The double insulated system is intended to protect the user from shock resulting from a break in the tool's internal insulation.
PRODUCTSPECiFiCATiONS Sizeof Paper....................................................... 1/4Sheet Motion..................................................................... Orbital OrbitalDiameter..................................................... 1/16in. No Load Speed .................................. Input .......................................... 14,000 r/min. (RPM) 120 V, 60 Hz, AC only, 2 A Net Weight .................................................................. 2 Ibs.
UNPACKING This product has been shipped completely assembled. [] Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. [] Inspect the product carefully to make sure no breakage or damage occurred during shipping. _1_ WARNING: If any do not operate this replaced. Failure to in serious personal A [] Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
[] Remove non-adhesive sandpaper, then lift up on paper clamp lever and lock it into place. [] Carefully peel adhesive backing from new 1/4 sheet sandpaper. PAPER CLAMP LEVER [] Position sandpaper, making sure front edge of sandpaper is aligned with front edge of the cushion, then carefully press sticky side of sandpaper on cushion. NOTE: Sandpaper must be aligned with the front edge of the cushion for proper functioning of the flush sanding feature.
DUSTLESS SANDING TO CONNECT See Figure 5 - 6. ,_ WARNING: HOSE See Figure 6. When sanding for an extended period of time, you can easily attach the dust exhaust of the sander to a vacuum. To attach: Do not use the dust bag when sand- ing metal. Using the dust bag when sanding metal creates a fire hazard, which could damage the tool and lead to serious personal injury. [] Unplug the sander. [] Remove dust bag from sander. [] Attach vacuum hose to dust exhaust.
OPERATINGTHE ORBITAL SANDER Clamp or otherwise secure the work to prevent it from moving under the sander. _IL WARNING: MOTION Orbital motion is ideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions or for finishing surfaces to be painted. The sandpaper moves in tiny circles at a very high speed, allowing the sander to move easily. See Figure 7. Unsecured work could be thrown towards the operator causing injury.
A A CLEANING WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. See Figures 9 - 10. A WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. GENERAL DUST BAG ASSEMBLY MAINTENANCE Avoid using solvents when cleaning plastic parts.
CRAFTSMAN 1/4 SHEET SANDER MODEL NUMBER 315.
CRAFTSMAN 1/4 SHEET SANDER MODEL NUMBER 315.111770 J The number model in all number correspondence will be foundregarding on a plate your attached SANDER to the or when motorordering housing.repair Always parts, mention the model SEE BACK PAGE FOR PARTS ORDERING PARTS Key No. | INSTRUCTIONS LIST PaN Number Description 1 039176001020 Data Label ....................................................................................................... 1 2 039176001021 Logo Label ..................
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourse If. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, ® (1-800-469-4663) day or night(U.S.A, www.sears.com and Canada) www.sears.
