Operator's Manual 3/8 in. 16.8 VOLT CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.114420 Save this manual future reference ,_ for WARNING: Toreducethe risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuc'k and Co., 3333 Beverly Rd.
• Warranty ....................................................................................................................................................................... • General Safety Rules ............................................................................................................................................ 3 4 • Specific Safety 4 b • Symbols ............................................................................................................................
_k WARNING: Read and understand all instructions, Failure to follow a)! instructions listed below, may resu_ in eiectnc shock, fire and/or serious personal injury. SAVE THESE Work • Do not operate power tools in e_plosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite l:he dust or fumes. Keep bystanders, children, and visitors away while operating a power tool.
Tool Use and Care • Use clamps or other practical way to secure and supped the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed, Do nor use tool ff switch does not turn it on or off.
._WARNING : Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery fmmediately. Failure to heed this warning can result in serious personal mjury. • Do not operate charger if it has received e sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. Following this rule will reduce the risk of electric shook, tire. or serious personal injury.
important:Someofthefollowing symbols maybeusedonyourtool.Pleasestudythemandlearntheirmeaning.
Chuck Motor GearTrain Switch NoLoad Speed BAI-rERY PACK 3/8 in. Keyless DC Motor !6.8 Volt Two Speed Variable Speed O 33g/rain (Low) 0 1200/min (High) Item No. _11370 (1323516) KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to use your drill-driver, familiarize yourself with all operating features and safety requirements.
TWO-SPEED GEAR TRAIN(HI-LO) LEVEL TORQUE KEVLESS CHUCK RING __ DIRECTION OF ROTATION SELECTOR (FORWARD/REV ERSE) LEVEL REAR VIEW BIT STORAGE TRIGGER SCREWD_VER BATTERYPACK / SHOWN_ BATTERY PACK 1 SHOWNIN CHARGER K WRIST STRAP _I/2in, CHARGER RED LED ON INDICATES GREENLED ON AFTER FASTCHARGING CYCLE,INDICATESFULLY CHARGEDBATTERY PACKAND IN TRICKLE CHARGE MODE Y ELLOWANDGREEN LEDSON INDICATESDEEPLY DISCHARGEDOR DEFECTIVEBATI'ERY PACK.
,_ WARNING : De no_ allow familiarity with your drill driver to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. BATTERY PACK The battery pack for your iool has been shipped in a low charge condition to prevent possible problems. Therefore, you shdutd charge i_until light on front of charger changes from red to green, Note; Batteries will not reach full charge the first time they are charged.
SWITCH SeeFigure2. ToturnyourdnllON,depress theswitchtrigger.Toturnit TO INSTALL • Lock switch trigger on your drill by placing the direction of rotation selector in center position, See Figure 5. OFF, relea'_;e the swilch trigger. • Place battery pack in your drill, Align raised rib on battery pack with groove inside drill See Figure 4 FORWARD!REVERSE SELECTOR VARIABLE SPEED SWITCHTRIGGER VARIABLE BATTERY PACK BATTERY PACK Fig.
SWITCHLOCK SeeFigure5. TheswitchtriggercanbelockedintheOFFposition. This featureconbeusedtoprevent thepossibility ofaccidental staEing when not in use. To lock switch trigger, place the direction of rotation seh;ctor (Forward/Reverse Selector) in center position KJ=YLESS CHUCK See Figure 6. Your drill has a keyless chuck. As the name implies, you can hand tighten or release dnll bits in the chuck iaws. Grasp and hold the cellar of the chuck with one hand. Rotate the c_huck body with your other hand.
INSTALLINGBITS SeeFigure7, RI-'MOVING • Lock the switch trigger by placing the direction of rotation sel_cter ir_ c_-;nter position. See Figure 5. • Lock the switch trigger by placing the direction of rotation selector in center position, See Figure 5. • Oper_ or close ct/iJck iaws to a point.; where the open ing is slightly larger than the bit size you intend to use. Also, E_ise the fronl: of your drill slightly to keep the bit from falling out of the chuck jaws.
BIT STORAGE See Figure 10. Di:_ILLING $_,_ Figure 12. When not it_ use, bits provided with your drill Can be placed in the storage a,_a located on the bottom of your drill as shown in Figure 10. LEVEL SCREWDRIVER BiTS \ ,_ I IIC_: __..__ WAFINING; Always wear safety gogg es or safety glasses with side shields when operating tools. Failure to do so could result in obiects being thrown into your eyes, resulting in possible sedous injury.
CHUCKREMOVAL See Figures • 13, 1_t, and 15 [he chuck must be removed accessories, Ta ramave: in order to use some • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. • insert a 5/16 in. or larger hex key into the chuck of your drill and tighten the chuck jaws securely. • Tap the hex key sharply with a mallet in a clockwise direction See Figure 13, This will loosen the screw in the chuck for easy removat.
_1=WARNING: D_) not abuse power tools. Abusive pracllcas tool as well as workpieca, When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plasti_-_ are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remow) dirt, dust, oil, grease, etc.
CRAFTSMAN I 318 in., 16.8 VOLT CORDLESS in ali correspondence he model numberwill repair paEs. DRILL-DRIVER - MODEL NO. 315.114420 regarding your 3/8 in., 16.8 VOLT CORDLESS DRILL-DRIVER or when ordering be found on a plate attached to the motor housing. Always mention the model number SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 4 3 PARTS LIST Key No. Par[ Number Description i 6613401 Screw (Special) ......................................................................
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. !iiili For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, _ (1-800-469-4663) day or night(U.S.A, www.sears.com and Canada) iii!i!_ www.sears.