Operator`s manual

TO REATTACH DUST BOWL
See Figure 7.
• Position the two sections as shown in Figure 7. Align slots on bottom of dust bowl with tabs on bottom of motor
housing then snap the two sections together.
DUSTBOWL TOINSTALL
TABS
SLOTS Fig. 7
ACCESSORIES
See Figure 8.
The attachments shown in Figure 8, are provided with your hand vac. These attachments easily fit into the nose of the
dust bowl. If replacing these attachments, contact your nearest Sears Retail Store.
_ WARNING: The use of attachments or accessories not listed might be hazardous.
BRUSHNOZZLE
oos
BRUSHNOZZLE INsTOLL_ __.._
DUSTBOWL
CREVICETOOL
CREVICETOOL
TO
INSTALL
_TO
REMOVE
Fig. 8