Operator`s manual

BATTERYPACK

SHOWNIN CHARGER

CHARGING

ASSEMBLY

REDLED

ORANGELED CHARGINGSTAND

Fig. 2

TO INSTALL BATTERY PACK

See Figure 3.

• Lockthe switch triggeron the drill by placing the direc-

tionof rotation selector in the center position.

• Place the battery pack inthe drill. Align the raisedrib

on the battery pack withthe grooveinsidethe drill.

CAUTION: When placing battery pack inthe tool,

be sure raised rib on battery pack aligns with the

bottom of the drill and latches into place properly.

Improper installation of the battery pack can cause

damage to internal components.

• Make sure the latches on each side of the battery pack

snap into place and the battery pack is secured inthe

drill before beginning operation.

TO REMOVE BATTERY PACK

See Figure3.

• Lockthe switch triggeron the drillby placing the direc-

tionof rotation selector inthe centerposition.

• Locatethe latches on theside ofthe batterypackand

depress to releasethe battery pack from the drill.

• Removethe battery pack fromthe drill.

LATCHES

RELEASEBATTERYPACK

Fig. 3