Operator`s manual

ADJUSTABLE TORQUE CLUTCH

The drillis equipped with an adjustable torque clutch for

driving different types of screws into different materials.

The proper setting depends on the type of material and

the size of screw you are using.

ADJUSTING TORQUE

See Figure 6.

• There are twenty-four torque indicator settings located

on the front of the drill.

• Rotate the adjusting ring to the desiredsetting.

• 1 - 4 For driving small screws

• 5 - 8 For driving screws into soft

material

• 9 - 12 Fordriving screws into soft and hard

materials

• 13 - 16 For driving screws into hard wood

• 17 - 23 For driving large screws

• 41L! For heavy drilling

TODECREASE ADJUSTING

TORQUE RING

LED WORKLIGHT

See Figure 7.

The LED worklight on the foot of the drill will come on

when the switch trigger is depressed. This provides addi-

tional lighting on the surface of the workpiece for opera-

tion in lower-light areas.

LED

WORKLIGHT

Fig. 7

TOINCREASE

TORQUE

BIT STORAGE

See Figure 8.

Whennot in use, bits providedwith the drill can be placed "

inthe storage area locatedon the baseofthe drill,

SCREWDRIVERBIT(S)

Fig. 6

BIT

AREA

Fig. 8