Operator`s manual

Someofthefollowingsymbolsmaybeusedonthistool.Pleasestudythemandlearntheirmeaning.Properinterpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIG NATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
"-',-, Alternating Current Typeof current
= Direct Current Typeor a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alerf Do not to rain in locations.
expose
or
use
damp
i_ To reduce the risk of injury, user must read and understandRead The Operator's Manual operator's manual before using this product.
O Always wear safety goggles or safety glasses with side shields,
Eye
Protection
or a full face shield when operating this product.
,_ Safety Precautions that involve your safety.
Alert
i_ Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
I_ No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
I_ No Hands Failure to keep your hands away from the blade will result in
Symbol
serious personal injury.
Failureto keep your hands away from the blade will result in
No Hands
Symbol
serious personal injury.
Hot Surface To reduce the risk of injury or damage, avoid contact with
any hot surface.
6