Operator`s manual

KNOW YOUR DRILL-DRIVER
See Figure 1.
Beforeattemptingto usethis product,familiarize yourself
with alloperatingfeatures and safety rules,
BIT STORAGE
Bits provided withthe drill-driver can be placed in the
storage area, located on the base of the drill.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill-driver has a direction of rotation (forward/reverse/
center lock) selector located above the switch trigger for
changing the direction of bit rotation. Setting the switch
trigger in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LED WORKLIGHT
The LEDworklight, located on the front of the tool base,
illuminates when the switch trigger is depressed. This
provides extra light for increased visibility.
LEVEL
A levelis located onthe top ofthe motor housing to help
you keep the drill bit levelduring use.
TORQUE ADJUSTMENT RING
Your drill-driver has a 24-position clutch. The torque
adjustment ring can be turned to select the right amount
of torque for your application.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
UNPACKING
This product has been shipped completely assembled.
• Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
• Inspectthe tool carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
• ]f any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
Drill-Driver
Battery Pack (2)
Charger
Double-ended Bits (2)
Carrying Case
Operator's Manual
_lh WARNING: Ifany parts are missing do not operate
this tooluntil the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
A,
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
a,
WARNING: To prevent accidentalstarting that
could cause serious personal injury,always remove
the battery pack from the tool when assembling
parts.
9